Holiday Ornament / Reindeer | Compact Laser Project

Design or adapt an original laser-cut ornament while checking licences, simplifying SVGs, controlling scale and distinguishing cut from engrave.

Seasonal design brief

Design or adapt a laser-cut ornament that can be personalized and hung safely. A reindeer is one possible worked idea, not the required design for every student.

Source and licence first

Original sketches are preferred. If a teacher-approved vector reference is used, record the creator, original page, licence and changes made. Use public-domain, open-licensed or otherwise permitted work; a search result thumbnail or “free SVG” label is not enough.

Prepare the design

  1. simplify the SVG and remove accidental overlaps, stray nodes and duplicate lines;
  2. set the document units and intended physical scale;
  3. check antlers, points, bridges and other small features against the actual material/process;
  4. make the hanging hole large enough for the approved string or hook and leave enough material around it;
  5. separate CUT geometry from ENGRAVE artwork using the local file convention;
  6. add original personalization without weakening critical regions;
  7. print at full size or cut a small approved test before producing the final ornament.

Evaluate

Check silhouette, readable personalization, surface finish, hanging balance, fragile features, material use and whether the final work still respects its source licence. Record one change for a future version.

Return to Laser Cutting & 2D Fabrication or find open starting geometry in the Laser Fabrication Library.