Fabrication Plate Builder
This browser tool makes repeatable plate geometry. It opens in inches. A millimetre toggle remains available when a machine or material specification needs it; changing the unit converts the current values instead of changing the physical size. The downloaded SVG keeps the selected physical unit. The tool does not choose safe material, machine settings, joints, mounting hardware, or a final fit.
What the downloads contain
- Cut SVG: the actual full-size plate outline and circular or rectangular openings. Open this in Inkscape or compatible laser software. Red paths are cut geometry. Optional guides, including the A-D corner labels, are not cut paths.
- Settings JSON: a text record of every builder value. It is useful for documentation or troubleshooting, but it is not a laser-cut file and this version of the builder does not import it.
- Share link: the current settings stored in the web address. Send or bookmark this when you want the builder to reopen the same design.
Circle and rectangle dimensions, without the jargon
- For a circle, set Outer diameter. The tool calculates its radius as half the diameter.
- For a ring, set Outer diameter and Ring wall thickness. The ring’s inner opening is the outer diameter minus twice the wall thickness.
- For a rounded rectangle, set Width, Height, and Corner radius. Corner radius affects only the four outside corners.
- For centre and repeated pattern openings, choose Circle or Rectangle. Every opening in that pattern uses the same shape and dimensions. Circle patterns can size from a measured object plus clearance or use a direct finished diameter.
- Turn off Add centre or repeated pattern openings when you want only the plate outline. The optional A-D corner openings are controlled separately and can remain on or off.
- Pattern rectangle width runs left to right and length runs top to bottom. Rows, grids, radial layouts, perimeter layouts, centre spacing, validation and SVG export all work with either pattern shape.
- For corner openings, choose Circle or Rectangle for all four at once, then override any labelled corner if needed. Rectangle width runs left to right; rectangle length runs top to bottom.
- Shape centre measures from each adjoining plate edge to the centre of the opening. Nearest edge of shape measures the remaining material between the cutout and those straight edges. The preview labels the corners A (top left), B (top right), C (bottom right) and D (bottom left).
What happens next
The laser fabrication library is the idea and part library. This builder generates repeated plate geometry. Inkscape is the 2D finishing environment. Onshape is the better tool for assemblies and 3D relationships. These are complementary workflows, not interchangeable buttons.
Need supports for the plate? Open the Laser-Cut Leg & Support Builder to generate straight, angled, triangular, cross-foot or rear-easel parts with measured slots.
Planning the complete holder? Use the Tool Organizer Gallery and design criteria to check visibility, labels, access, stability, wall mounting and modularity.