Choose the support by the force path

The purple coupon tests the chosen tab length and calculated slot width. Blue slot rectangles are mating geometry to position in the holder plate, not separate finished parts.

Before cutting

  1. Measure the actual sheet thickness in several places.
  2. Cut the fit coupon before the complete legs.
  3. Open the SVG in Inkscape and confirm its physical dimensions at 100% scale.
  4. Place matching slots in the holder plate and check that each slot has enough material around it.
  5. Prototype in cardboard or scrap stock.
  6. Assemble the real holder and test front-to-back and side-to-side tipping.

Use the Tool Organizer Gallery and design criteria to plan and test the complete build. Use the Fabrication Plate Builder for the holder plate and repeated holes.

Which reference file do I use?

The SVG, DXF, DWG, CDR, PDF and PNG in the reference folder are different formats of the same template set. Do not combine all six files.

The external sheet contains several easel concepts. Select one complete matching group of parts, move that group into a new document, confirm the scale, and resize every slot for the measured sheet thickness. The reference was drawn around 0.118-inch material, which is slightly thinner than nominal 1/8-inch material. Always test one joint first.