Tools and Machines
This website does not contain safety information. Use your board rules, training, supervision, and your professional experience and judgement.
These photos show the machine or setup. They do not show every safe action.
Your teacher will choose the tools for your shop.
Measure and mark
A ruler and square copy the sizes from the plan to the wood.
Cut the outside
A hand saw, scroll saw, or band saw cuts the parts and outside shape.
Safety sources: CCOHS band saws and OSHA scroll saws
Drill an opening
The drill press starts a round opening at the marked point.
Safety source: WorkSafeBC drill presses
Cut the slots
The narrow blade cuts the slots that join the two parts.
Shape and finish
Sand the faces, outside edges, and inside curves until they are smooth. An oscillating sander or drum sander can smooth inside curves.
Safety sources: CCOHS sanders and NIOSH wood-dust control

Photo credits
- Combination square: Limarie Cabrera, CC BY 2.0
- Band saw: Health and Safety Executive. Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence.
- Scroll saw: OSHA Machine Guarding eTool
- Coping saw: Dale Simonson, CC BY-SA 2.0
- Drill press: CDC Public Health Image Library, Brenda J. Jones, public domain
- Belt and disc sander: Chris.sherlock, CC BY-SA 4.0
- Orbital sander: Dave Pape, public domain
- Hand sanding: Nenad Stojković, CC BY 2.0
Next: build the phone holder.