3D Modelling + 3D Printing | Tinkercad, Onshape, Stamps & Faux-Enamel Jewellery
Additive manufacturing builds geometry layer by layer. Orientation changes strength and finish, supports leave evidence, holes may print undersize, thin details can disappear, and matching parts need tested clearance. Students keep the editable source model so evidence can drive a real revision.
Current TAS project
Mission 2: Turn Your Logo into a Stamp
Turn the logo from the introductory keychain into a 38 mm mirrored relief stamp. Make the same required object in Tinkercad or Onshape, test the impression and revise it. Keep the back flat for a later teacher-added lighthouse handle.
Classroom mission sequence
- Basic keychain: learn the workplane, primitive shapes, alignment, grouping and export.
- Logo stamp: add mirroring, controlled relief, minimum feature size and physical impression testing.
- Faux-enamel brooch: turn the same logo into enclosed cavities and finish them with teacher-approved nail polish.
- Onshape rebuild: reproduce the stamp or brooch with variables, constraints and an editable feature history.
Learning sequence
- 3D Modelling Foundations: Onshape CAD vs Blender Mesh: choose the model type, use constraints and dimensions, and preserve design intent.
- Slicing, Orientation & Supports: connect layer height, walls, infill, toolpaths, strength, time, and surface quality.
- Tolerances & Functional Parts: test holes, clearance, press fits, fasteners, assemblies, brackets, adapters, and repair parts.
- Mission 2: Turn Your Logo into a Stamp: common dimensions, success criteria, impression test and submission.
- Tinkercad Logo Stamp: import, mirror, align, group and export the 38 mm stamp.
- Onshape Logo Stamp: rebuild the stamp with variables, constrained sketches and named features.
- Mission 3: Tinkercad Faux-Enamel Logo Earring or Brooch: reuse the logo as fillable colour cavities.
- Parametric Faux-Enamel Pin / Jewellery: the later Onshape version with constrained sketches and evidence-based revision.
- Functional-Part Design Challenge: a general/advanced project for a measured need.
What this unit does not assume
Machine-specific safety instruction, operating procedures, assessments, and authorization are kept outside this website. Follow your school board’s safety guidelines and the course-specific instruction provided by your teacher. Students in Mr. Andrade’s classes can find that information in Google Classroom. Profiles and tolerances are printer-, material-, and process-dependent; measure and test rather than copy a universal number.
Ontario curriculum relevance: Useful for TIJ1O, TDJ2O, TMJ2O, and TEJ2O, with strong transfer to senior Technological Design and Manufacturing Technology courses involving CAD/CAM, additive manufacturing, functional parts, prototyping, assemblies, and quality control.
Relevant senior contexts can include TDJ3M/TDJ4M, TDJ3O/TDJ4O, and appropriate TMJ3M/TMJ4M, TMJ3C/TMJ4C, or TMJ3E/TMJ4E projects. Apply those aliases only where the actual assignment matches the course focus.
Free CAD, model, and slicing resources
Model with education access to Onshape or open-source FreeCAD and OpenSCAD. Compare downloadable work on Printables, Thingiverse, NASA 3D Resources, and Smithsonian Open Access, then slice with PrusaSlicer, UltiMaker Cura, or the official OrcaSlicer repository. Check each model’s licence, scale, geometry, and suitability. More provisional options are in the full free-resource directory · Work in Progress.
Start with the Logo Stamp mission. Continue to the Tinkercad faux-enamel brooch, then use 3D Modelling Foundations for the parametric Onshape pathway.