Glossary
Use this glossary for terms and units that appear across the course notes, slides, assignments, and classroom examples.
Glossary category
#3 terms
3D printing
3MF
Also called: 3D Manufacturing Format
3MF is a 3D-manufacturing file format that can package model geometry, units, materials, and other production information.
3MF is a 3D-manufacturing file format that can package model geometry, units, materials, and other production information. [19]
Category:
555 Timer
Also called: 555 IC, 555 Timer IC
A 555 timer is an integrated circuit used to create timed pulses, delays, and oscillations with external components.
A 555 timer is an integrated circuit used to create timed pulses, delays, and oscillations with external components.
Category:
References
A61 terms
A/D converter
A device that converts analog input signals to digital output.
A device that converts analog input signals to digital output. [1, p. 1211]
Category:
Absolute path
AC beta
AC effective resistance
Also called: Re
The resistance of a coil for higher-frequency alternating current.
The resistance of a coil for higher-frequency alternating current. The value of Re is more than the DC resistance of the coil because it includes the losses associated with high-frequency alternating current in a coil. These losses include skin effect, eddy currents, and hysteresis losses. [1, p. 1211]
Category:
AC equivalent circuit
AC load line
A graph that shows all the possible values of IC and VCE when a transistor amplifier is driven by an AC signal.
A graph that shows all the possible values of IC and VCE when a transistor amplifier is driven by an AC signal. [1, p. 1211]
Category:
AC load power
Also called: PL
The AC power that is dissipated by the load, RL.
The AC power that is dissipated by the load, RL. [1, p. 1211]
Category:
AC resistance of a diode
The equivalent resistance of a forward-biased diode as it appears to small AC signals.
The equivalent resistance of a forward-biased diode as it appears to small AC signals. For a standard diode For the emitter diode in Id IE [1, p. 1211]
Category:
Acceleration
Acceleration is the rate of change of velocity with time and is a vector.
Acceleration is the rate of change of velocity with time. It is a vector, so a change in speed, direction, or both is acceleration. In calculus, acceleration is the derivative of velocity with respect to time. Because velocity is the derivative of position or displacement with respect to time, acceleration is the second derivative of position or displacement with respect to time. Common units include metres per second squared (m/s²) and feet per second squared (ft/s²).
Category:
Accuracy
Accuracy is the fraction of all predictions that a classification model gets correct.
Accuracy is the fraction of all predictions that a classification model gets correct.
Category:
References
Active component
One that can control voltage or current.
One that can control voltage or current. Examples are transistors and diodes. [1, p. 1211]
Category:
Active filter
A filter that uses components or devices that have the ability to amplify such as transistors and op amps.
A filter that uses components or devices that have the ability to amplify such as transistors and op amps. [1, p. 1211]
Category:
Active region
The region of operation where the collector of a transistor acts like a current source.
The region of operation where the collector of a transistor acts like a current source. [1, p. 1211]
Category:
Active-low Logic
An active-low signal performs its named action when the signal is at logic low.
An active-low signal performs its named action when the signal is at logic low.
Category:
References
Actual dimension
Acute angle
Additive manufacturing
Admittance
Also called: Y
Reciprocal of impedance Z in AC circuits.
Reciprocal of impedance Z in AC circuits. [1, p. 1211]
Category:
AI disclosure
AI Hallucination
An AI hallucination is generated content presented without adequate support from reliable evidence.
An AI hallucination is generated content presented without adequate support from reliable evidence.
Category:
References
AI output
AI output is content or a prediction produced by an artificial-intelligence system.
AI output is content or a prediction produced by an artificial-intelligence system. [5]
Category:
Air gap
Algorithm
An algorithm is a finite, ordered procedure for solving a problem or completing a task.
An algorithm is a finite, ordered procedure for solving a problem or completing a task.
Category:
References
Alignment
Alignment template
Alkaline cell or battery
Alternating Current
Also called: AC
Alternating current changes direction periodically and usually changes magnitude with time.
Category:
References
Alternation
Alternator
Amp-clamp probe
A meter that can measure AC currents, generally from the 60-Hz AC power line, without breaking open the circuit.
A meter that can measure AC currents, generally from the 60-Hz AC power line, without breaking open the circuit. The probe of the meter is actually a clamp that fits around the current-carrying conductor. [1, p. 1211]
Category:
Ampere
Also called: A, amp, amps
The ampere (A) is the SI unit of electric current.
The ampere, symbol A, is the SI unit used to measure electric current. In basic circuit work, current values are stated in amperes or amps.
Category:
Ampere turns/meter
Ampere-hour (A·h) rating
A common rating for batteries that indicates how much load current a battery can supply over a specified discharge time.
A common rating for batteries that indicates how much load current a battery can supply over a specified discharge time. For example, a battery with a 100-A.h rating can deliver 1 A for 100 h or 2 A [1, p. 1211]
Category:
Ampere-turn
Also called: A·t
Unit of magnetizing force equal to 1 A × 1 turn.
Unit of magnetizing force equal to 1 A × 1 turn. [1, p. 1211]
Category:
Amplifier
Analog Input
Also called: Analogue Input
An analog input converts a voltage within an allowed range into a numerical reading.
An analog input converts a voltage within an allowed range into a numerical reading.
Category:
References
Analog multimeter
A test instrument that is used to make voltage, current, and resistance measurements.
A test instrument that is used to make voltage, current, and resistance measurements. An analog multimeter uses a moving pointer and a printed scale to display the value of the measured quantity. [1, p. 1211]
Category:
AND Gate
An AND gate outputs 1 only when every input is 1.
An AND gate outputs 1 only when every input is 1.
Category:
References
Animation
Animation creates the appearance of change or motion by presenting a sequence of images or states over time.
Animation creates the appearance of change or motion by presenting a sequence of images or states over time. Pencil2D is used in this curriculum for introductory frame-based 2D animation. [10]
Category:
Antiresonance
A term to describe the condition of unity power factor in a parallel LC circuit.
A term to describe the condition of unity power factor in a parallel LC circuit. Antiresonance is used to distinguish it from the case of equal XL and XC values in a series LC circuit. [1, p. 1211]
Category:
Apparent power
The product of voltage and current VA when V and I are out of phase.
The product of voltage and current VA when V and I are out of phase. [1, p. 1211]
Category:
Arctangent
Also called: arctan
An inverse trigonometric function that specifies the angle, u, corresponding to a given tangent (tan) value.
An inverse trigonometric function that specifies the angle, u, corresponding to a given tangent (tan) value. [1, p. 1211]
Category:
Armature
Array
An array stores an ordered collection of values that are accessed by position or index.
An array stores an ordered collection of values that are accessed by position or index.
Category:
References
Artificial intelligence
Also called: AI
Artificial intelligence describes machine-based systems that produce outputs from supplied inputs for human-defined objectives.
Artificial intelligence describes machine-based systems that produce outputs from supplied inputs for human-defined objectives. [4, Sec. 1.2]
Category:
Aspect ratio
Aspect ratio is the proportional relationship between an image's width and height.
Aspect ratio is the proportional relationship between an image's width and height. [9]
Category:
Assembly
An assembly is a collection of parts positioned and related to represent a complete product or mechanism.
An assembly is a collection of parts positioned and related to represent a complete product or mechanism. [15]
Category:
Astable Multivibrator
Also called: Astable
An astable multivibrator switches repeatedly between two states without requiring an external trigger for each cycle.
An astable multivibrator switches repeatedly between two states without requiring an external trigger for each cycle.
Category:
References
Asymmetrical JFET
Atom
The smallest particle of an element that still has the same characteristics as the element.
The smallest particle of an element that still has the same characteristics as the element. [1, p. 1211]
Category:
Atomic number
The number of protons, balanced by an equal number of electrons, in an atom.
The number of protons, balanced by an equal number of electrons, in an atom. [1, p. 1211]
Category:
Attention
Attention lets a neural network assign different weights to information when producing a representation or prediction.
Attention lets a neural network assign different weights to information when producing a representation or prediction.
Category:
References
Attenuation
A term that refers to a reduction in signal amplitude.
A term that refers to a reduction in signal amplitude. [1, p. 1211]
Category:
Attribution
Audience
The audience is the group of people a design is intended to reach or serve.
The audience is the group of people a design is intended to reach or serve. [3]
Category:
Audio frequency
Also called: af
Within the range of hearing, approximately 16 to 16,000 Hz.
Within the range of hearing, approximately 16 to 16,000 Hz. [1, p. 1211]
Category:
Authentication
Authentication is the process of verifying the identity of a user, device, or service.
Category:
References
Authoritative source
Autotransformer
A single, tapped winding used to step up or step down voltage.
A single, tapped winding used to step up or step down voltage. [1, p. 1211]
Category:
Avalanche
The effect that causes a sharp increase in reverse current, IR, when the reverse-bias voltage across a diode becomes excessive.
The effect that causes a sharp increase in reverse current, IR, when the reverse-bias voltage across a diode becomes excessive. [1, p. 1211]
Category:
Average value
In sine-wave AC voltage or current, 0.637 of peak value.
In sine-wave AC voltage or current, 0.637 of peak value. [1, p. 1211]
Category:
B37 terms
B-H magnetization curve
A graph of field intensity H versus flux density B.
A graph of field intensity H versus flux density B. [1, p. 1211]
Category:
Back EMF
Also called: Counter EMF
Back EMF is a voltage induced in a coil that opposes the change in current that produced it.
Category:
References
Back-offohmmeter scale
Backer
Backpropagation
Backpropagation efficiently computes how each neural-network parameter contributes to prediction error.
Backpropagation efficiently computes how each neural-network parameter contributes to prediction error.
Category:
References
Balanced bridge
A circuit consisting of two series strings in parallel.
A circuit consisting of two series strings in parallel. The balanced condition occurs when the voltage ratio in each series string is identical. The output from the bridge is taken between the centers of each series string. When the voltage ratios in each series string are identical, the output voltage is zero and the bridge circuit is said to be balanced. [1, p. 1211]
Category:
Band-pass filter
Filter that allows coupling a band of frequencies to the load.
Filter that allows coupling a band of frequencies to the load. [1, p. 1211]
Category:
Band-stop filter
Filter that prevents a band of frequencies from being coupled to the load.
Filter that prevents a band of frequencies from being coupled to the load. [1, p. 1211]
Category:
Bandwidth
A range of frequencies that has a resonant effect in LC circuits.
A range of frequencies that has a resonant effect in LC circuits. [1, p. 1211]
Category:
Bank
Banks in series
Parallel resistor banks that are connected in series with each other.
Parallel resistor banks that are connected in series with each other. [1, p. 1211]
Category:
Barrier potential
Also called: VB
The potential difference at the p-n junction of a diode.
The potential difference at the p-n junction of a diode. VB exists between the wall of positive and negative ions that are created as a result of free electrons diffusing from the n-side of the diode to the p-side. [1, p. 1211]
Category:
Base
A thin and very lightly doped region in a transistor.
A thin and very lightly doped region in a transistor. The base is sandwiched between the emitter and collector regions. [1, p. 1211]
Category:
Baseline Model
A baseline model is a simple reference result used to judge whether a more complex model adds useful performance.
A baseline model is a simple reference result used to judge whether a more complex model adds useful performance.
Category:
References
Battery
Group of cells connected in series or parallel.
Group of cells connected in series or parallel. [1, p. 1211]
Category:
Bias
Bias is a systematic tendency that can produce unfair, distorted, or unrepresentative results.
Bias is a systematic tendency that can produce unfair, distorted, or unrepresentative results. [4]
Category:
Bidirectional diode thyristor
Bigram
A bigram is an ordered pair of adjacent tokens used in a two-token language model.
A bigram is an ordered pair of adjacent tokens used in a two-token language model.
Category:
References
Bilateral components
Electronic components that have the same current for opposite polarities of applied voltage.
Electronic components that have the same current for opposite polarities of applied voltage. [1, p. 1211]
Category:
Bill of Materials
Also called: BOM
A bill of materials is a structured list of the parts, quantities, and identifying details needed for a build.
A bill of materials is a structured list of the parts, quantities, and identifying details needed for a build.
Category:
References
Binary Number System
Also called: Base 2, Binary
The binary number system represents values with powers of two and the digits 0 and 1.
The binary number system represents values with powers of two and the digits 0 and 1.
Category:
References
BIOS
Also called: Basic Input Output System
BIOS is older PC firmware that initializes hardware and starts the operating-system boot process.
BIOS is older PC firmware that initializes hardware and starts the operating-system boot process.
Category:
References
Bipolar Junction Transistor
Also called: BJT
A bipolar junction transistor is a three-terminal semiconductor device in which base current controls a larger collector current.
A bipolar junction transistor is a three-terminal semiconductor device in which base current controls a larger collector current.
Category:
References
Bleeder current
Bolt
Boolean Algebra
Boolean algebra describes logical values and operations such as NOT, AND, and OR.
Boolean algebra describes logical values and operations such as NOT, AND, and OR.
Category:
References
Boolean operation
Also called: Boolean, Difference, Intersection, Union, Vector Boolean
A Boolean operation combines or subtracts shapes using union, difference, or intersection rules.
A Boolean operation combines or subtracts shapes using union, difference, or intersection rules. [8]
Category:
Breadboard
A solderless breadboard provides reusable connected rows and power rails for prototyping circuits.
A solderless breadboard provides reusable connected rows and power rails for prototyping circuits.
Category:
References
Breakdown region
The region of transistor operation where a large undesired collector current flows as a result of the collector-base diode breaking down due to excessive reverse-bias voltage.
The region of transistor operation where a large undesired collector current flows as a result of the collector-base diode breaking down due to excessive reverse-bias voltage. [1, p. 1211]
Category:
Breakdown voltage
Also called: VBR
The reverse-bias voltage at which the avalanche effect occurs.
The reverse-bias voltage at which the avalanche effect occurs. The avalanche effect causes the reverse current, IR, to increase sharply. [1, p. 1212]
Category:
Bridge
A bridge is printed material that spans between supported regions without support directly underneath.
A bridge is printed material that spans between supported regions without support directly underneath. [20]
Category:
Brushes
In a motor or generator, devices that provide stationary connections to the rotor.
In a motor or generator, devices that provide stationary connections to the rotor. [1, p. 1212]
Category:
Build plate
Bulk resistance
Also called: rB
The resistance of the p and n materials in a diode.
The resistance of the p and n materials in a diode. [1, p. 1212]
Category:
Burr
Bypass capacitor
One that has very low reactance in a parallel path.
One that has very low reactance in a parallel path. [1, p. 1212]
Category:
Bézier curve
A Bézier curve is a vector curve controlled by anchor points and direction handles.
A Bézier curve is a smooth vector curve controlled by anchor points and direction handles. Moving the points or handles changes the curve without turning it into pixels.
Category:
References
C101 terms
CAD sketch
Calibration
Calibration compares a measurement or machine result with a known reference and records or corrects the difference.
Calibration compares a measurement or machine result with a known reference and records or corrects the difference. [26]
Category:
Calorie
Amount of heat energy needed to raise the temperature of one gram of water by 18C.
Amount of heat energy needed to raise the temperature of one gram of water by 18C. [1, p. 1212]
Category:
Capacitance
Capacitive reactance
Also called: XC
A measure of a capacitor’s opposition to the flow of alternating current.
A measure of a capacitor’s opposition to the flow of alternating current. XC is measured in 2 fC XC 5 1 IC. XC applies only to sine-wave AC circuits. [1, p. 1212]
Category:
Capacitive voltage divider
A voltage divider that consists of series-connected capacitors.
A voltage divider that consists of series-connected capacitors. The amount of voltage across each capacitor is inversely proportional to its capacitance value. [1, p. 1212]
Category:
Capacitor
A capacitor stores energy in an electric field between conductors separated by an insulator.
A capacitor stores energy in an electric field between conductors separated by an insulator.
Category:
References
Carbon-composition resistors
Resistors made of finely divided carbon or graphite mixed with a powdered insulating material.
Resistors made of finely divided carbon or graphite mixed with a powdered insulating material. [1, p. 1212]
Category:
Carbon-film resistors
Resistors made by depositing a thin layer of carbon on an insulated substrate.
Resistors made by depositing a thin layer of carbon on an insulated substrate. The carbon film is cut in the form of a spiral. [1, p. 1212]
Category:
Celsius scale
Also called: 8C
Temperature scale that uses 0° for the freezing point of water and 100° for the boiling point.
Temperature scale that uses 0° for the freezing point of water and 100° for the boiling point. Formerly called centigrade. [1, p. 1212]
Category:
Ceramic
Insulator with a high dielectric constant.
Insulator with a high dielectric constant. [1, p. 1212]
Category:
Cgs
Centimeter-gram-second system of units.
Centimeter-gram-second system of units. [1, p. 1212]
Category:
Chamfer
Channel
The area or conducting region between the drain and source terminals of an FET.
The area or conducting region between the drain and source terminals of an FET. The channel can be made of either n-type or p-type semiconductor material. [1, p. 1212]
Category:
Charging
- The effect of increasing the amount of charge stored in a capacitor.
Category:
Charging current
The current that flows to and from the plates of a capacitor as the charge stored by the dielectric increases.
The current that flows to and from the plates of a capacitor as the charge stored by the dielectric increases. [1, p. 1212]
Category:
Chassis ground
Common return for all electronic circuits mounted on one metal chassis or PC board.
Common return for all electronic circuits mounted on one metal chassis or PC board. Usually connects to one side of DC supply voltage. [1, p. 1212]
Category:
Chip capacitor
Choke
Inductance with high XL compared with the R of the circuit.
Inductance with high XL compared with the R of the circuit. [1, p. 1212]
Category:
Circuit
Circuit Breaker
A circuit breaker opens a circuit when current exceeds a safe condition and can normally be reset.
Category:
References
Circuit Schematic
Also called: Schematic
A circuit schematic uses standardized symbols and nets to show electrical relationships rather than physical layout.
A circuit schematic uses standardized symbols and nets to show electrical relationships rather than physical layout.
Category:
References
Circular mil
Also called: cmil
Cross-sectional area of round wire with diameter of 1 mil or 0.001 in.
Cross-sectional area of round wire with diameter of 1 mil or 0.001 in. [1, p. 1212]
Category:
Class A amplifier
Class B amplifier
Class B push-pull amplifier
A class B amplifier that uses two transistors to reproduce the full AC cycle of input votlage.
A class B amplifier that uses two transistors to reproduce the full AC cycle of input votlage. Each transistor conducts on opposite half-cycles of the input voltage. [1, p. 1212]
Category:
Class C amplifier
Class Imbalance
Class imbalance occurs when some target classes have many more examples than others.
Class imbalance occurs when some target classes have many more examples than others.
Category:
References
Classification
Classification is a machine-learning task that predicts which category or class an example belongs to.
Classification is a machine-learning task that predicts which category or class an example belongs to.
Category:
References
Classification Threshold
Also called: Decision Threshold
A classification threshold converts a model score or probability into a class decision.
A classification threshold converts a model score or probability into a class decision.
Category:
References
Clearance
Clearance hole
Client
A client is a program or device that requests a service from a server.
Category:
References
Closed path
Also called: Closed vector path
A closed path is a vector path whose last anchor point connects back to its first anchor point.
A closed path joins its last anchor point to its first. This makes an enclosed vector shape that can hold a fill, such as one mountain in a traced logo.
Category:
References
Closed-loop Control
Closed-loop control uses measured output feedback to adjust the controller's action.
Closed-loop control uses measured output feedback to adjust the controller's action.
Category:
References
Closed-loop cutofffrequency
Also called: fCL
The frequency at which the closed-loop voltage gain decreases to 70.7% of its maximum value.
The frequency at which the closed-loop voltage gain decreases to 70.7% of its maximum value. [1, p. 1212]
Category:
Closed-loop voltage gain
Also called: ACL
The voltage gain of an amplifier with negative feedback.
The voltage gain of an amplifier with negative feedback. [1, p. 1212]
Category:
Clustering
Clustering groups examples by similarity without requiring known class labels.
Clustering groups examples by similarity without requiring known class labels.
Category:
References
Coaxial cable
An inner conductor surrounded by an outer conductor that serves as a shield.
An inner conductor surrounded by an outer conductor that serves as a shield. [1, p. 1212]
Category:
Coding of capacitors
The method used to indicate the value of a capacitor.
The method used to indicate the value of a capacitor. [1, p. 1212]
Category:
Coefficient of coupling
Also called: k
The fraction of total flux from one coil linking another coil nearby.
The fraction of total flux from one coil linking another coil nearby. [1, p. 1212]
Category:
Coil
Turns of wire conductor to concentrate a magnetic field.
Turns of wire conductor to concentrate a magnetic field. [1, p. 1212]
Category:
Collector
A large, moderately doped region in a transistor.
A large, moderately doped region in a transistor. The collector is the largest of all three transistor regions because it dissipates the most heat. [1, p. 1212]
Category:
Color code
System in which colors are used to indicate values in resistors.
System in which colors are used to indicate values in resistors. [1, p. 1212]
Category:
Combinational Logic
Combinational logic produces outputs determined only by the current input values.
Combinational logic produces outputs determined only by the current input values.
Category:
References
Command Shell
Also called: Shell
A command shell reads commands, expands their arguments, and starts programs or built-in operations.
A command shell reads commands, expands their arguments, and starts programs or built-in operations.
Category:
References
Common-base amplifier
A transistor amplifier that has its input applied to the emitter and its output taken from the collector.
A transistor amplifier that has its input applied to the emitter and its output taken from the collector. The common-base amplifier provides a high voltage and power gain but its current gain is less than 1. [1, p. 1212]
Category:
Common-collector amplifier
A transistor amplifier that has its input applied to the base and its output taken from the emitter.
A transistor amplifier that has its input applied to the base and its output taken from the emitter. The common-collector amplifier provides a high current and power gain but its voltage gain is less than 1. [1, p. 1212]
Category:
Common-drain amplifier
Common-emitter amplifier
A transistor amplifier that has its input applied to the base and its output taken from the collector.
A transistor amplifier that has its input applied to the base and its output taken from the collector. The common-emitter amplifier provides a high voltage and current gain and a very high power gain. [1, p. 1212]
Category:
Common-gate amplifier
An amplifier that has its input applied to the source and its output taken from the drain.
An amplifier that has its input applied to the source and its output taken from the drain. [1, p. 1212]
Category:
Common-mode input
An identical input voltage appearing on both inputs of a differential amplifier.
An identical input voltage appearing on both inputs of a differential amplifier. [1, p. 1212]
Category:
Common-mode rejection ratio
Also called: CMRR
The ratio of differential voltage gain, Ad, to common mode voltage gain, ACM.
The ratio of differential voltage gain, Ad, to common mode voltage gain, ACM. CMRR is usually specified in decibels. [1, p. 1212]
Category:
Common-mode voltage gain
Also called: ACM
The voltage gain of a differential amplifier for a common- mode signal.
The voltage gain of a differential amplifier for a common- mode signal. [1, p. 1212]
Category:
Common-source amplifier
An amplifier that has its input applied to the gate and its output taken from the drain.
An amplifier that has its input applied to the gate and its output taken from the drain. [1, p. 1212]
Category:
Commutator
Converts reversing polarities to one polarity.
Converts reversing polarities to one polarity. [1, p. 1212]
Category:
Comparator
An op-amp circuit that compares the signal voltage on one input with a reference voltage on the other.
An op-amp circuit that compares the signal voltage on one input with a reference voltage on the other. [1, p. 1212]
Category:
Complex number
Has real and j terms; uses form A 1 jB.
Has real and j terms; uses form A 1 jB. [1, p. 1212]
Category:
Compound
A combination of two or more elements.
A combination of two or more elements. [1, p. 1212]
Category:
Computer Numerical Control
Also called: CNC
Computer numerical control coordinates machine motion from programmed commands.
Computer numerical control coordinates machine motion from programmed commands.
Category:
References
Computer-aided design
Also called: CAD
Computer-aided design uses software to create, modify, analyse, or document a design.
Computer-aided design uses software to create, modify, analyse, or document a design. Onshape is the primary parametric CAD tool used in this curriculum. [14]
Category:
Concept
A design concept is a proposed overall approach to solving a design problem.
A design concept is a proposed overall approach to solving a design problem. It describes the main idea before all construction details are fixed. [3]
Category:
Condenser
Conductance
Also called: G
Ability to conduct current.
Ability to conduct current. It is the reciprocal of resistance The unit is the siemens (S). [1, p. 1212]
Category:
Conductor
Any material that allows the free movement of electric charges, such as electrons, to provide an electric current.
Any material that allows the free movement of electric charges, such as electrons, to provide an electric current. [1, p. 1212]
Category:
Confusion Matrix
A confusion matrix counts predicted classes against actual classes so different error types remain visible.
A confusion matrix counts predicted classes against actual classes so different error types remain visible.
Category:
References
Constant-current source
A generator whose internal resistance is very high compared with the load resistance.
A generator whose internal resistance is very high compared with the load resistance. Since its internal resistance is so high, it can supply a constant current to a load whose resistance value varies over a wide range. [1, p. 1212]
Category:
Constant-voltage source
A generator whose internal resistance is very low compared with the load resistance.
A generator whose internal resistance is very low compared with the load resistance. Since its internal resistance is so low, it can supply a constant voltage to a load whose resistance value varies over a wide range. [1, p. 1212]
Category:
Constraint
Also called: Restriction
A constraint is a limit that a design must stay within.
A constraint is a limit that a design must stay within, such as time, cost, size, material, safety, or available tools. [3]
Category:
Context
Context is the surrounding information needed to interpret a request, statement, or result.
Context is the surrounding information needed to interpret a request, statement, or result. [5]
Category:
Continuity
Continuous path for current.
Continuous path for current. Reading of zero ohms with an ohmmeter. [1, p. 1212]
Category:
Continuity testing
A resistance measurement that determines whether there is zero ohms of resistance (approximately) between two points, such as across the ends of a wire conductor.
A resistance measurement that determines whether there is zero ohms of resistance (approximately) between two points, such as across the ends of a wire conductor. [1, p. 1212]
Category:
Contrast
Contrast is a visible difference between elements that helps them remain distinguishable.
Contrast is a visible difference between elements that helps them remain distinguishable. [25, Sec. 1.4.3]
Category:
Control System
A control system directs a process or machine so its output follows an intended behaviour.
A control system directs a process or machine so its output follows an intended behaviour.
Category:
References
Conventional current
The direction of current flow associated with positive charges in motion.
The direction of current flow associated with positive charges in motion. The current flow direction is from a positive to a negative potential, which is in the opposite direction of electron flow. [1, p. 1212]
Category:
Copyright
Copyright is the legal protection given to original works, controlling specified uses such as copying and publishing.
Copyright is the legal protection given to original works, controlling specified uses such as copying and publishing. [24]
Category:
Corona effect
Effect of ionization of air around a point at high potential.
Effect of ionization of air around a point at high potential. [1, p. 1212]
Category:
Cosine
A trigonometric function of an angle, equal to the ratio of the adjacent side to the hypotenuse in a right triangle.
A trigonometric function of an angle, equal to the ratio of the adjacent side to the hypotenuse in a right triangle. [1, p. 1212]
Category:
Cosine wave
One whose amplitudes vary as the cosine function of an angle.
One whose amplitudes vary as the cosine function of an angle. It is 90° out of phase with the sine wave. [1, p. 1212]
Category:
Coulomb
Also called: C
Unit of electric charge.
Unit of electric charge. 1 C 5 6.25 × 1018 electrons. [1, p. 1212]
Category:
Counterbore
Countersink
Coupling capacitor
Covalent bond
Pairing of atoms with electron valence of 64.
Pairing of atoms with electron valence of 64. [1, p. 1213]
Category:
Covalent bonding
The sharing of valence electrons between neighboring atoms in a silicon crystal or other crystalline structure.
The sharing of valence electrons between neighboring atoms in a silicon crystal or other crystalline structure. [1, p. 1213]
Category:
Cps
Cycles per second.
Cycles per second. Formerly used as unit of frequency. Replaced by hertz (Hz) unit, where 1 [1, p. 1213]
Category:
Criterion
Also called: Criteria, Design criteria, Design criterion
A criterion is a standard used to judge whether a design succeeds.
A criterion is a standard used to judge whether a design succeeds. [3]
Category:
Cron
Cron is a Unix-style scheduler that runs commands at configured dates or repeating times.
Cron is a Unix-style scheduler that runs commands at configured dates or repeating times.
Category:
References
Cross-validation
Cross-validation repeatedly changes which data subset is held out so model performance can be estimated more reliably.
Cross-validation repeatedly changes which data subset is held out so model performance can be estimated more reliably.
Category:
References
Crossover distortion
The distortion that occurs in a class B push-pull amplifier when the transistors are biased right at cutoff.
The distortion that occurs in a class B push-pull amplifier when the transistors are biased right at cutoff. When the input voltage crosses through zero both transistors in the push-pull amplifier are offand the output voltage cannot follow the input voltage. [1, p. 1213]
Category:
CRT
Cathode-ray tube.
Cathode-ray tube. A device that converts electric signals to a visual display on a fluorescent screen. [1, p. 1213]
Category:
Crystal filter
A filter that is made up of a crystalline material such as quartz.
A filter that is made up of a crystalline material such as quartz. Crystal filters are often used in place of conventional LC circuits because there Q is so much higher. [1, p. 1213]
Category:
Curie temperature
The temperature at which a magnetic material loses its ferromagnetic properties.
The temperature at which a magnetic material loses its ferromagnetic properties. [1, p. 1213]
Category:
Current
Also called: Electric Current, I
Current is the rate at which electric charge flows through a circuit.
Electric current is the rate at which electric charge flows through a circuit. The common quantity symbol is I and the SI unit is the ampere (A). More current means more electric charge is moving past a point each second.
Category:
Current Divider
Current gain
Also called: A i
The ratio of output current to input current in a transistor amplifier.
The ratio of output current to input current in a transistor amplifier. [1, p. 1213]
Category:
Current source
Supplies I 5 Vyri to load with ri in parallel.
Supplies I 5 Vyri to load with ri in parallel. [1, p. 1213]
Category:
Current-source region
The region of operation in which the drain of a JFET acts as a current source.
The region of operation in which the drain of a JFET acts as a current source. The current-source region of operation exists when VDS. VP. [1, p. 1213]
Category:
Cutoff
The region of transistor operation where the collector current, IC, is zero.
The region of transistor operation where the collector current, IC, is zero. [1, p. 1213]
Category:
Cutofffrequency
The frequency at which the attenuation of a filter reduces the output amplitude to 70.7% of its value in the passband.
The frequency at which the attenuation of a filter reduces the output amplitude to 70.7% of its value in the passband. [1, p. 1213]
Category:
Cycle
One complete set of values for a repetitive waveform.
One complete set of values for a repetitive waveform. [1, p. 1213]
Category:
D59 terms
Damping
Reducing the Q of a resonant circuit to increase the bandwidth.
Reducing the Q of a resonant circuit to increase the bandwidth. [1, p. 1213]
Category:
Data Leakage
Also called: Label Leakage
Data leakage lets information unavailable at prediction time influence model training or evaluation.
Data leakage lets information unavailable at prediction time influence model training or evaluation.
Category:
References
Data Logging
Data logging records measurements with time, units, and enough metadata to interpret the results later.
Data logging records measurements with time, units, and enough metadata to interpret the results later.
Category:
References
Data Type
A data type defines the kind of value a program can store and the operations allowed on it.
A data type defines the kind of value a program can store and the operations allowed on it.
Category:
References
DB
Also called: Decibel
Abbreviation for decibel.
Abbreviation for decibel. Equals 10 times the logarithm of the ratio of two power levels. [1, p. 1213]
Category:
DC alpha
Also called: aDC
The ratio of collector current, IC, to emitter current, IE, in a transistor; DC 5 IC IE.
The ratio of collector current, IC, to emitter current, IE, in a transistor; DC 5 IC IE. [1, p. 1213]
Category:
DC beta
Also called: bDC
The ratio of collector current, IC, to base current, IB, in a transistor
The ratio of collector current, IC, to base current, IB, in a transistor [1, p. 1213]
Category:
DC input power
Also called: PCC
The amount of DC power dissipated by a transistor amplifier.
The amount of DC power dissipated by a transistor amplifier. [1, p. 1213]
Category:
DC load line
A graph that shows all of the possible values of IC and VCE for a given transistor amplifier.
A graph that shows all of the possible values of IC and VCE for a given transistor amplifier. The endpoints of the DC load line are IC(sat) and VCE(off) which represent the values of IC and VCE when the transistor is in saturation and cutoff. [1, p. 1213]
Category:
Debouncing
Also called: Switch Debounce
Debouncing prevents the rapid transitions of a mechanical contact from being counted as multiple intended events.
Debouncing prevents the rapid transitions of a mechanical contact from being counted as multiple intended events.
Category:
References
Deburring
Also called: Deburr
Deburring removes unwanted burrs and sharp edges left by manufacturing.
Deburring removes unwanted burrs and sharp edges left by manufacturing. [23]
Category:
Decade
Decade resistance box
A unit for providing any resistance within a wide range of values.
A unit for providing any resistance within a wide range of values. [1, p. 1213]
Category:
Decimal notation
Numbers that are written in standard form without using powers of 10 notation.
Numbers that are written in standard form without using powers of 10 notation. [1, p. 1213]
Category:
Decimal Number System
Also called: Base 10, Decimal
The decimal number system represents values with powers of ten and the digits 0 through 9.
The decimal number system represents values with powers of ten and the digits 0 through 9.
Category:
References
Decision Tree
A decision tree makes predictions by following learned feature tests through branches to an output.
A decision tree makes predictions by following learned feature tests through branches to an output.
Category:
References
Degaussing
Demagnetizing by applying an AC field and gradually reducing it to zero.
Demagnetizing by applying an AC field and gradually reducing it to zero. [1, p. 1213]
Category:
Delta (D) network
Three components connected in series in a closed loop.
Three components connected in series in a closed loop. Same as pi () network. [1, p. 1213]
Category:
Depletion mode
The mode of operation for a MOSFET in which the polarity of VGS causes the drain current to be reduced as the channel becomes depleted of available charge carriers.
The mode of operation for a MOSFET in which the polarity of VGS causes the drain current to be reduced as the channel becomes depleted of available charge carriers. [1, p. 1213]
Category:
Depletion zone
The area located at the p-n junction of a diode that is void or depleted of all charge carriers.
The area located at the p-n junction of a diode that is void or depleted of all charge carriers. [1, p. 1213]
Category:
Derating curve
A graph showing how the power rating of a resistor decreases as its operating temperature increases.
A graph showing how the power rating of a resistor decreases as its operating temperature increases. [1, p. 1213]
Category:
Derating factor
The amount that the power rating of a transistor must be reduced for each degree Celsius above 25°C.
The amount that the power rating of a transistor must be reduced for each degree Celsius above 25°C. The derating factor is specified in W/°C. [1, p. 1213]
Category:
Design brief
A design brief states the problem, intended users, goals, and major limits of a project.
A design brief states the problem, intended users, goals, and major limits of a project. [3]
Category:
Design intent
Design intent is the planned way a model should behave when dimensions or features change.
Design intent is the planned way a model should behave when dimensions or features change. [13]
Category:
Desoldering
Desoldering removes solder so a connection or component can be separated without avoidable damage.
Desoldering removes solder so a connection or component can be separated without avoidable damage.
Category:
References
Diac
A bidirectional semiconductor device that conducts when the voltage across its terminals reaches the breakover voltage 6VBO.
A bidirectional semiconductor device that conducts when the voltage across its terminals reaches the breakover voltage 6VBO. Once conducting the voltage across the diac drops to a very low value. [1, p. 1213]
Category:
Diamagnetic
Material that can be weakly magnetized in the direction opposite from the magnetizing field.
Material that can be weakly magnetized in the direction opposite from the magnetizing field. [1, p. 1213]
Category:
Dielectric
Dielectric absorption
The inability of a capacitor to completely discharge to zero.
The inability of a capacitor to completely discharge to zero. Dielectric absorption is sometimes called battery action or capacitor memory. [1, p. 1213]
Category:
Dielectric constant
Ability to concentrate the electric field in a dielectric.
Ability to concentrate the electric field in a dielectric. [1, p. 1213]
Category:
Dielectric material
Insulating material.
Insulating material. It cannot conduct current but does store charge. [1, p. 1213]
Category:
Dielectric strength
The ability of a dielectric to withstand a potential difference without internal arcing.
The ability of a dielectric to withstand a potential difference without internal arcing. [1, p. 1213]
Category:
Differential input voltage
Also called: Vid
The voltage difference between the two inputs applied to a differential amplifier.
The voltage difference between the two inputs applied to a differential amplifier. [1, p. 1213]
Category:
Differential voltage gain
Also called: Ad
The ratio of output voltage, Vout, to differential input voltage, Vid.
The ratio of output voltage, Vout, to differential input voltage, Vid. [1, p. 1213]
Category:
Differentiator
An RC circuit with a short time constant for pulses across R.
An RC circuit with a short time constant for pulses across R. [1, p. 1213]
Category:
Digital Logic Level
Also called: Logic Level
A digital logic level is a voltage range interpreted as low, high, or indeterminate by a digital input.
A digital logic level is a voltage range interpreted as low, high, or indeterminate by a digital input.
Category:
References
Digital Multimeter
Also called: DMM, Multimeter
A digital multimeter measures quantities such as voltage, current, resistance, and continuity when connected in the correct mode.
A digital multimeter measures quantities such as voltage, current, resistance, and continuity when connected in the correct mode.
Category:
References
Dimension
Diode
A unidirectional device that allows current to flow through it in only one direction.
A unidirectional device that allows current to flow through it in only one direction. [1, p. 1213]
Category:
Diode bias
A form of biasing for class B push- pull amplifiers that uses diodes to provide a slight amount of forward bias for the base-emitter junctions of each transistor.
A form of biasing for class B push- pull amplifiers that uses diodes to provide a slight amount of forward bias for the base-emitter junctions of each transistor. [1, p. 1213]
Category:
Direct Current
Also called: DC
Direct current maintains one direction of charge flow, even if its magnitude changes.
Category:
References
Direct Select Tool
Also called: Direct Selection Tool
The Direct Select Tool selects and moves individual anchor points in a vector path.
The Direct Select Tool lets you select and move individual anchor points in a vector path. Use it to adjust one part of a shape without moving the whole shape.
Category:
References
Discharge current
The current that flows to and from the plates of a capacitor as the charge stored by the dielectric decreases.
The current that flows to and from the plates of a capacitor as the charge stored by the dielectric decreases. [1, p. 1213]
Category:
Discharging
- The action of neutralizing the charge stored in a capacitor by connecting a conducting path across the capacitor leads.
- The action of neutralizing the charge stored in a capacitor by connecting a conducting path across the capacitor leads. (2) The process of neutralizing the separated charges on the electrodes of a cell or battery as a result of supplying current to a load resistance. [1, p. 1213]
Category:
Disk Partition
Also called: Partition
A disk partition is a defined region of a storage device that can be managed as a separate logical area.
A disk partition is a defined region of a storage device that can be managed as a separate logical area.
Category:
References
Displacement
Displacement is the change in position from a starting point to an ending point, including direction.
Displacement is a vector that describes the change in position from a starting point to an ending point. It has both magnitude and direction and does not depend on the total path travelled.
Category:
Distance
Distribution
Distribution spaces selected objects evenly along a direction or between reference points.
Distribution spaces selected objects evenly along a direction or between reference points. [8]
Category:
Domain Name System
Also called: DNS
The Domain Name System maps hierarchical names to resource records such as IP addresses.
The Domain Name System maps hierarchical names to resource records such as IP addresses.
Category:
References
Doping
The process of adding impurity atoms to a pure semiconductor material such as silicon.
The process of adding impurity atoms to a pure semiconductor material such as silicon. [1, p. 1213]
Category:
Double-subscript notation
A notational system that identifies the points in the circuit where a voltage measurement is to be taken, i.e.; VAG.
A notational system that identifies the points in the circuit where a voltage measurement is to be taken, i.e.; VAG. The first letter in the subscript indicates the point in the circuit where the measurement is to be taken whereas the second letter indicates the point of reference. [1, p. 1213]
Category:
Dowel
A dowel is a cylindrical pin used to align, locate, or join parts.
A dowel is a cylindrical pin used to align, locate, or join parts. [23]
Category:
DPDT
Double-pole double-throw switch or relay contacts.
Double-pole double-throw switch or relay contacts. [1, p. 1213]
Category:
DPST
Double-pole single-throw switch or relay contacts.
Double-pole single-throw switch or relay contacts. [1, p. 1213]
Category:
Drain
One of the three leads of an FET.
One of the three leads of an FET. The drain lead connects to one end of the conducting channel. [1, p. 1213]
Category:
Drilling template
Dynamic Host Configuration Protocol
Also called: DHCP
DHCP supplies network configuration, such as an IP address and lease time, to a client.
DHCP supplies network configuration, such as an IP address and lease time, to a client.
Category:
References
Dynamometer
Type of AC meter, generally for 60 Hz.
Type of AC meter, generally for 60 Hz. [1, p. 1213]
Category:
D’Arsonval meter
A DC analog meter movement commonly used in ammeters and voltmeters.
A DC analog meter movement commonly used in ammeters and voltmeters. [1, p. 1213]
Category:
E36 terms
Earth ground
A direct connection to the earth usually made by driving copper rods into the earth and then connecting the ground wire of an electrical system to this point.
A direct connection to the earth usually made by driving copper rods into the earth and then connecting the ground wire of an electrical system to this point. The earth ground connection can serve as a common return path for the current in a circuit. [1, p. 1213]
Category:
Eddy current
Circulating current induced in the iron core of an inductor by AC variations of magnetic flux.
Circulating current induced in the iron core of an inductor by AC variations of magnetic flux. [1, p. 1213]
Category:
Edge
An edge is a line segment that connects two vertices and bounds faces in a polygon mesh.
An edge is a line segment that connects two vertices and bounds faces in a polygon mesh. [16]
Category:
Effective value
For sine-wave AC waveform, 0.707 of peak value.
For sine-wave AC waveform, 0.707 of peak value. Corresponds to heating effect of same DC value. Also called rms value. [1, p. 1213]
Category:
Efficiency
Ratio of power output to power input × 100%.
Ratio of power output to power input × 100%. [1, p. 1213]
Category:
EIA
Electric field
The invisible lines of force between opposite electric charges.
The invisible lines of force between opposite electric charges. [1, p. 1213]
Category:
Electricity
Dynamic electricity is the effect of voltage in producing current in conductors.
Dynamic electricity is the effect of voltage in producing current in conductors. Static electricity is accumulation of charge. [1, p. 1213]
Category:
Electrolyte
Electrolytic capacitor
Type with very high C because electrolyte is used to form very thin dielectric.
Type with very high C because electrolyte is used to form very thin dielectric. Must be connected with correct polarity in a circuit. [1, p. 1213]
Category:
Electromagnet
Magnet whose magnetic field is associated with electric current in a coil.
Magnet whose magnetic field is associated with electric current in a coil. [1, p. 1214]
Category:
Electron
Basic particle of negative charge in orbital rings around the nucleus in an atom.
Basic particle of negative charge in orbital rings around the nucleus in an atom. [1, p. 1214]
Category:
Electron flow
Current of negative charges in motion.
Current of negative charges in motion. Direction is from the negative terminal of the voltage source, through the external circuit, and returning to the positive side of the source. Opposite to the direction of conventional current. [1, p. 1214]
Category:
Electron valence
The number of electrons in an incomplete outermost shell of an atom.
The number of electrons in an incomplete outermost shell of an atom. [1, p. 1214]
Category:
Electron volt
Unit of energy equal to the work done in moving a charge of 1 electron through a potential difference of 1 V.
Unit of energy equal to the work done in moving a charge of 1 electron through a potential difference of 1 V. [1, p. 1214]
Category:
Electron-hole pair
The creation of a free electron and a hole when a valence electron gains enough energy to leave its covalent bond in a silicon crystal.
The creation of a free electron and a hole when a valence electron gains enough energy to leave its covalent bond in a silicon crystal. [1, p. 1214]
Category:
Electrostatic Discharge
Also called: ESD
Electrostatic discharge is a sudden transfer of static charge that can damage electronic components.
Electrostatic discharge is a sudden transfer of static charge that can damage electronic components.
Category:
References
Element
A substance that cannot be decomposed any further by chemical action.
A substance that cannot be decomposed any further by chemical action. [1, p. 1214]
Category:
Embedding
An embedding is a learned vector representation in which useful relationships can appear as geometric proximity.
An embedding is a learned vector representation in which useful relationships can appear as geometric proximity.
Category:
References
Emf
Electromotive force; voltage that produces current in a circuit.
Electromotive force; voltage that produces current in a circuit. [1, p. 1214]
Category:
Emitter
The most heavily doped region in a transistor.
The most heavily doped region in a transistor. Its job is to inject or emit current carriers into the base region. [1, p. 1214]
Category:
Emitter bypass capacitor
Also called: CE
A capacitor that bypasses the AC signal around the emitter resistor in a transistor amplifier.
A capacitor that bypasses the AC signal around the emitter resistor in a transistor amplifier. [1, p. 1214]
Category:
Emitter follower
Another name for the common-collector amplifier.
Another name for the common-collector amplifier. [1, p. 1214]
Category:
Engineering Design Process
Also called: Design Process, EDP
The engineering design process is an iterative way to identify needs, create solutions, test them, and improve them.
The engineering design process is a flexible, iterative approach to solving problems. A typical cycle identifies the problem and needs, investigates existing information and solutions, develops ideas, creates or prototypes a solution, tests and evaluates it, communicates results, and improves the design. The process can loop backward or repeat whenever new evidence changes what the design needs. [3, Appendix I]
Category:
Engineering Notation
Engineering notation uses powers of ten whose exponents are multiples of three.
Engineering notation uses powers of ten whose exponents are multiples of three.
Category:
References
Engraving
Also called: Laser engraving
Laser engraving removes or alters a surface to create a visible recessed mark or image.
Laser engraving removes or alters a surface to create a visible recessed mark or image. [26]
Category:
Enhancement mode
The mode of operation for a MOSFET in which the polarity of VGS causes the conductivity of the channel to be enhanced, thus increasing the drain current.
The mode of operation for a MOSFET in which the polarity of VGS causes the conductivity of the channel to be enhanced, thus increasing the drain current. [1, p. 1214]
Category:
Ensemble Model
An ensemble combines predictions from multiple models to produce a final result.
An ensemble combines predictions from multiple models to produce a final result.
Category:
References
Equivalent Resistance
Equivalent resistance is the single resistance that has the same terminal voltage-current behaviour as a resistor network.
Equivalent resistance is the single resistance that has the same terminal voltage-current behaviour as a resistor network.
Category:
References
Equivalent series resistance
Also called: ESR
A resistance in series with an ideal capacitor that collectively represents all of the losses in a capacitor.
A resistance in series with an ideal capacitor that collectively represents all of the losses in a capacitor. Ideally, the ESR of a capacitor should be zero. [1, p. 1214]
Category:
Evaluation
Evidence
Evidence is information used to support a conclusion or design decision.
Evidence is information used to support a conclusion or design decision. [3]
Category:
Exception
An exception is a program event that interrupts normal execution when an error or unusual condition occurs.
An exception is a program event that interrupts normal execution when an error or unusual condition occurs.
Category:
References
Explainability
Explainability concerns how people can understand the evidence and reasoning behind a model's behaviour.
Explainability concerns how people can understand the evidence and reasoning behind a model's behaviour.
Category:
References
Extrinsic semiconductor
A semiconductor that has been doped with impurity atoms to alter the characteristics of the material, mainly its conductivity.
A semiconductor that has been doped with impurity atoms to alter the characteristics of the material, mainly its conductivity. [1, p. 1214]
Category:
Extrude
Also called: Extrusion
Extrude creates or removes three-dimensional volume by extending a sketch region in a direction.
Extrude creates or removes three-dimensional volume by extending a sketch region in a direction. [14]
Category:
F49 terms
F connector
Face
A face is a surface region bounded by edges in a polygon mesh.
A face is a surface region bounded by edges in a polygon mesh. [16]
Category:
Fahrenheit scale
Also called: 8F
Temperature scale that uses 32° for the freezing point of water and 212° for the boiling point.
Temperature scale that uses 32° for the freezing point of water and 212° for the boiling point. [1, p. 1214]
Category:
Farad
Also called: F
Unit of capacitance.
Unit of capacitance. Value of one farad stores one coulomb of charge with one volt applied. [1, p. 1214]
Category:
Faraday’s law
For magnetic induction, the generated voltage is proportional to the flux and its rate of change.
For magnetic induction, the generated voltage is proportional to the flux and its rate of change. [1, p. 1214]
Category:
Fastener
A fastener is hardware used to join or secure two or more parts.
A fastener is hardware used to join or secure two or more parts. [23]
Category:
Feature
Feedback
Feedback is information about a design's performance or effect that can guide revision.
Feedback is information about a design's performance or effect that can guide revision. [3]
Category:
Feet per Second Squared
Also called: ft/s^2, ft/s²
Feet per second squared (ft/s²) is a non-SI unit of acceleration.
Feet per second squared, written ft/s², is a common non-SI unit of acceleration.
Category:
Ferrite
Magnetic material that is not a metal conductor.
Magnetic material that is not a metal conductor. [1, p. 1214]
Category:
Ferrite core
A type of core that has a high value of flux density, like iron, but is an insulator.
A type of core that has a high value of flux density, like iron, but is an insulator. A ferrite core used in a coil has minimum eddy current losses due to its high resistance. [1, p. 1214]
Category:
Ferromagnetic
Magnetic properties of iron and other metals that can be strongly magnetized in the same direction as the magnetizing field.
Magnetic properties of iron and other metals that can be strongly magnetized in the same direction as the magnetizing field. [1, p. 1214]
Category:
Field
Group of lines of force; magnetic or electric field.
Group of lines of force; magnetic or electric field. [1, p. 1214]
Category:
Field effect transistor
Also called: FET
A unipolar device that relies on only one type of charge carrier, either electrons or holes.
A unipolar device that relies on only one type of charge carrier, either electrons or holes. FETs are voltage-controlled devices with an input voltage controlling the output current. [1, p. 1214]
Category:
Field intensity
Field winding
File path
A file path identifies the location of a file or folder in a file system.
A file path identifies the location of a file or folder in a file system. [12]
Category:
File Permissions
Also called: Permissions
File permissions control which users may read, modify, or execute a file or access a directory.
File permissions control which users may read, modify, or execute a file or access a directory.
Category:
References
Filesystem
Also called: File System
A filesystem organizes stored data into files, directories, names, and associated metadata.
A filesystem organizes stored data into files, directories, names, and associated metadata.
Category:
References
Fill
Fill is the paint applied to the interior of a vector shape.
Fill is the paint applied to the interior of a vector shape. [8, Ch. 13]
Category:
Fillet
Film capacitor
A capacitor that uses a plastic film for its dielectric.
A capacitor that uses a plastic film for its dielectric. [1, p. 1214]
Category:
Filter
Circuit that separates different frequencies.
Circuit that separates different frequencies. [1, p. 1214]
Category:
Fit
Fit describes how tightly or freely mating parts go together.
Fit describes how tightly or freely mating parts go together. [20]
Category:
Fit gauge
Float charging
A method of charging in which the charger and the battery are always connected to each other for supplying current to the load.
A method of charging in which the charger and the battery are always connected to each other for supplying current to the load. With this method, the charger provides the current for the load and the current necessary to keep the battery fully charged. [1, p. 1214]
Category:
Floating Input
A floating input is not held at a defined logic voltage and may change state unpredictably.
Category:
References
Fluctuating direct current
Varying voltage and current but no change in polarity.
Varying voltage and current but no change in polarity. [1, p. 1214]
Category:
Flux
Flux density
Flyback Diode
Flywheel effect
Ability of an LC circuit to continue oscillating after the energy source has been removed.
Ability of an LC circuit to continue oscillating after the energy source has been removed. [1, p. 1214]
Category:
Form factor
The ratio of the rms to average values.
The ratio of the rms to average values. For a sine wave, rms [1, p. 1214]
Category:
Forward blocking current
The small current that flows in an SCR before breakover is reached.
The small current that flows in an SCR before breakover is reached. [1, p. 1214]
Category:
Forward breakover voltage
Forward-bias
The polarity of voltage across a diode that permits current to flow through it easily.
The polarity of voltage across a diode that permits current to flow through it easily. [1, p. 1214]
Category:
Frame
Frame rate
Free electron
Electron that can move freely from one atom to the next.
Electron that can move freely from one atom to the next. [1, p. 1214]
Category:
French cleat
A French cleat is a mounting system that hangs an object from matching interlocking bevelled strips.
A French cleat is a mounting system that hangs an object from matching interlocking bevelled strips. [23]
Category:
Frequency
Number of cycles per second for a waveform with periodic variations.
Number of cycles per second for a waveform with periodic variations. The unit is hertz (Hz). [1, p. 1214]
Category:
Frequency multiplier
A tuned class C amplifier that has its LC tank circuit tuned to a harmonic or multiple of the input frequency.
A tuned class C amplifier that has its LC tank circuit tuned to a harmonic or multiple of the input frequency. [1, p. 1214]
Category:
Front view
A front view is an orthographic view looking directly at the chosen front of an object.
A front view is an orthographic view looking directly at the chosen front of an object. [14]
Category:
Fuel cell
An electrochemical device that converts the chemicals hydrogen and oxygen into water, and in the process produces electricity.
An electrochemical device that converts the chemicals hydrogen and oxygen into water, and in the process produces electricity. A fuel cell provides a steady DC output voltage that can power motors, lights, or other appliances. Unlike a regular battery, however, a fuel cell constantly has chemicals flowing into it so it never goes dead. [1, p. 1214]
Category:
Full Adder
A full adder adds two input bits and a carry-in to produce a sum bit and carry-out.
A full adder adds two input bits and a carry-in to produce a sum bit and carry-out.
Category:
References
Full-wave rectifier
A circuit that provides an entirely positive or negative output voltage when an AC input voltage is applied.
A circuit that provides an entirely positive or negative output voltage when an AC input voltage is applied. A full-wave rectifier provides an output for both the positive and negative alternations of the input voltage. [1, p. 1214]
Category:
Function
A function is a named, reusable block of code that can accept inputs and return a result.
A function is a named, reusable block of code that can accept inputs and return a result.
Category:
References
Funity
The frequency where the open-loop voltage gain, Avol, of an op amp equals 1 or unity.
The frequency where the open-loop voltage gain, Avol, of an op amp equals 1 or unity. [1, p. 1214]
Category:
Fuse
A fuse opens a circuit by melting its element when excessive current persists.
Category:
References
G24 terms
Gain
Gain is the ratio of an output signal quantity to the corresponding input signal quantity.
Gain is the ratio of an output signal quantity to the corresponding input signal quantity.
Category:
References
Galvanic cell
Electrochemical type of voltage source.
Electrochemical type of voltage source. [1, p. 1214]
Category:
Galvanometer
Ganged capacitors
Two or three capacitor sections on one common shaft that can be rotated.
Two or three capacitor sections on one common shaft that can be rotated. [1, p. 1214]
Category:
Gate
One of the three leads of an FET.
One of the three leads of an FET. The gate is used to control the drain current. [1, p. 1214]
Category:
Gate-source cutoffvoltage
Also called: off, VGS
The amount of gate-source voltage required to reduce the drain current, ID, to zero.
The amount of gate-source voltage required to reduce the drain current, ID, to zero. [1, p. 1214]
Category:
Gauss
Unit of flux density in cgs system equal to one magnetic line of force per square centimeter.
Unit of flux density in cgs system equal to one magnetic line of force per square centimeter. [1, p. 1214]
Category:
General-purpose Input Output
Also called: GPIO
A GPIO pin is a configurable digital connection used by a controller to read or drive external circuits.
A GPIO pin is a configurable digital connection used by a controller to read or drive external circuits.
Category:
References
Generative AI
Also called: GenAI, Generative artificial intelligence
Generative AI is artificial intelligence that produces synthetic content such as text, images, audio, video, or code.
Generative AI is artificial intelligence that produces synthetic content such as text, images, audio, video, or code. [5]
Category:
Generator
A device that produces voltage output.
A device that produces voltage output. Is a source for either DC or AC V and I. [1, p. 1214]
Category:
Geometric constraint
Also called: Constraint in CAD, Sketch constraint
A geometric constraint limits or fixes relationships between entities in a CAD sketch.
A geometric constraint limits or fixes relationships between entities in a CAD sketch. [13]
Category:
Gerber File
Also called: Gerbers
A Gerber file describes one manufactured PCB layer for fabrication and inspection.
Category:
References
Germanium
Also called: Ge
Semiconductor element used for transistors and diodes.
Semiconductor element used for transistors and diodes. [1, p. 1214]
Category:
Giga
Gilbert
Also called: Gb
Unit of magnetomotive force in cgs system.
Unit of magnetomotive force in cgs system. One gilbert equals 0.794 ampere- turn. [1, p. 1214]
Category:
Git Branch
Also called: Branch
A Git branch is a named line of development whose tip advances as new commits are added.
A Git branch is a named line of development whose tip advances as new commits are added.
Category:
References
Git Commit
Also called: Commit
A Git commit records a project state together with identifying information and links to its parent history.
A Git commit records a project state together with identifying information and links to its parent history.
Category:
References
Gradient
A gradient collects the rates at which a function changes with respect to its parameters.
A gradient collects the rates at which a function changes with respect to its parameters.
Category:
References
Graph cycle
A 10:1 range of values on logarithmic graph paper.
A 10:1 range of values on logarithmic graph paper. [1, p. 1214]
Category:
Graphics layer
Ground
Common return to earth for AC power lines.
Common return to earth for AC power lines. Chassis ground in electronic equipment is the common return to one side of the internal power supply. [1, p. 1214]
Category:
Grounding
Also called: AI Grounding
Grounding connects generated claims to selected evidence, data, or observable system state.
Category:
References
GUESS Method
Also called: Given Unknown Equation Substitute Solve, GUESS Workflow
The GUESS method organizes a calculation as Given, Unknown, Equation, Substitute, and Solve.
The GUESS method organizes a calculation as Given, Unknown, Equation, Substitute, and Solve.
Category:
References
Gusset
A gusset is a plate or bracket that reinforces the connection between structural members.
A gusset is a plate or bracket that reinforces the connection between structural members. [23]
Category:
H23 terms
Half Adder
A half adder adds two input bits to produce a sum bit and a carry bit.
A half adder adds two input bits to produce a sum bit and a carry bit.
Category:
References
Half-power points
Bandwidth defined with 70.7% response for resonant LC circuit.
Bandwidth defined with 70.7% response for resonant LC circuit. [1, p. 1214]
Category:
Half-wave rectifier
A circuit that provides an entirely positive or negative output voltage when an AC input voltage is applied.
A circuit that provides an entirely positive or negative output voltage when an AC input voltage is applied. A half-wave rectifier provides an output for either the positive or negative alternation of the input voltage but not both. [1, p. 1214]
Category:
Hall effect
Small voltage generated by a conductor with current in an external magnetic field.
Small voltage generated by a conductor with current in an external magnetic field. [1, p. 1214]
Category:
Hallucination
Harmonic frequency
Exact multiple of fundamental frequency.
Exact multiple of fundamental frequency. [1, p. 1214]
Category:
Henry
Unit of inductance.
Unit of inductance. Current change of one ampere per second induces one volt across an inductance of one henry. [1, p. 1214]
Category:
Hertz
Also called: Hz
Unit of frequency.
Unit of frequency. One hertz equals one cycle per second. [1, p. 1214]
Category:
Hexadecimal Number System
Also called: Base 16, Hex, Hexadecimal
The hexadecimal number system represents values with powers of sixteen and the symbols 0 through 9 and A through F.
The hexadecimal number system represents values with powers of sixteen and the symbols 0 through 9 and A through F.
Category:
References
High-pass filter
A filter that allows the higher- frequency components of the applied voltage to develop appreciable output voltage while at the same time attenuating or eliminating the lower-frequency components.
A filter that allows the higher- frequency components of the applied voltage to develop appreciable output voltage while at the same time attenuating or eliminating the lower-frequency components. [1, p. 1214]
Category:
Hinge
Holding current
Also called: IH
- The minimum amount of current required to hold a thyristor (diac, SCR, or triac) in its conducting state.
Category:
Hole
The absence of a valence electron in a covalent bond structure.
The absence of a valence electron in a covalent bond structure. The hole exhibits a positive charge. [1, p. 1215]
Category:
Hole current
Motion of hole charges.
Motion of hole charges. Direction is the same as that of conventional current, opposite from electron flow. [1, p. 1215]
Category:
Horsepower
Also called: hp
A unit of mechanical power corresponding In terms of electric power, 1
A unit of mechanical power corresponding In terms of electric power, 1 [1, p. 1215]
Category:
Hot resistance
The R of a component with its normal load current.
The R of a component with its normal load current. Determined by VyI. [1, p. 1215]
Category:
Hot-wire meter
Human oversight
Human oversight is meaningful human review and control of an automated system and its effects.
Human oversight is meaningful human review and control of an automated system and its effects. [4]
Category:
Hydrometer
A device used to check the state of charge of a cell within a lead-acid battery.
A device used to check the state of charge of a cell within a lead-acid battery. [1, p. 1215]
Category:
Hyperlink
Also called: Link, Web link
A hyperlink connects a user from one web resource or location to another.
A hyperlink connects a user from one web resource or location to another. [11]
Category:
HyperText Markup Language
Also called: HTML
HTML is the markup language used to define the structure and meaning of web content.
HTML is the markup language used to define the structure and meaning of web content. [11]
Category:
Hypotenuse
Side of a right triangle opposite the 90° angle.
Side of a right triangle opposite the 90° angle. [1, p. 1215]
Category:
Hysteresis
Hysteresis uses different switching thresholds for rising and falling values to prevent rapid chatter.
Hysteresis uses different switching thresholds for rising and falling values to prevent rapid chatter.
Category:
References
I34 terms
IGFET
Insulated gate field effect transistor.
Insulated gate field effect transistor. Another name for a MOSFET. [1, p. 1215]
Category:
Image dimensions
Image resolution
Also called: Resolution
Image resolution describes the amount of pixel detail in a raster image.
Image resolution describes the amount of pixel detail in a raster image. [9]
Category:
Imaginary number
Value at 90°, indicated by j operator, as in the form jA.
Value at 90°, indicated by j operator, as in the form jA. [1, p. 1215]
Category:
Impedance
Also called: Z
The total opposition to the flow of current in a sine-wave AC circuit.
The total opposition to the flow of current in a sine-wave AC circuit. In an RC circuit, the impedance, Z, takes into account the 90° phase relation between XC and R. Impedance, Z, is measured in ohms. [1, p. 1215]
Category:
Impedance matching
Occurs when a transformer is used for its impedance transformation properties.
Occurs when a transformer is used for its impedance transformation properties. With impedance matching, maximum power is delivered to the load, RL. [1, p. 1215]
Category:
Inductance
Also called: L
Ability to produce induced voltage when cut by magnetic flux.
Ability to produce induced voltage when cut by magnetic flux. Unit of inductance is the henry (H). [1, p. 1215]
Category:
Induction
Ability to generate V or I without physical contact.
Ability to generate V or I without physical contact. Electromagnetic induction by magnetic field; electrostatic induction by electric field. [1, p. 1215]
Category:
Inductive reactance
Also called: X L
A measure of an inductor’s opposition to the flow of alternating current.
A measure of an inductor’s opposition to the flow of alternating current. XL is measured in ohms and is calculated as [1, p. 1215]
Category:
Inductor
An inductor stores energy in a magnetic field and opposes changes in current.
Category:
References
Infill
Input bias current
Also called: IB
The average of the two op- amp input currents IB1 and IB2.
The average of the two op- amp input currents IB1 and IB2. [1, p. 1215]
Category:
Input impedance
Input offset current
Also called: Ios
The difference between the two input bias currents IB1 and IB2.
The difference between the two input bias currents IB1 and IB2. [1, p. 1215]
Category:
Insulator
A material that does not allow current to flow when voltage is applied, because of its high resistance.
A material that does not allow current to flow when voltage is applied, because of its high resistance. [1, p. 1215]
Category:
Integrator
An RC circuit with a long time constant.
An RC circuit with a long time constant. Voltage output across C. [1, p. 1215]
Category:
Interbase resistance
Also called: RBB
The resistance of the n-type silicon bar in a UJT.
The resistance of the n-type silicon bar in a UJT. RBB appears as two resistances, RB1 and RB2. RBB 5 RB1 1 RB2. [1, p. 1215]
Category:
Interface state
Internal Pull-up
Also called: INPUT_PULLUP, Internal Pullup
An internal pull-up is a controller's built-in resistor that weakly holds an input high when no device pulls it low.
An internal pull-up is a controller's built-in resistor that weakly holds an input high when no device pulls it low.
Category:
References
Internal Resistance
Internal resistance models voltage loss and heating inside a source when it supplies current.
Internal resistance models voltage loss and heating inside a source when it supplies current.
Category:
References
Internal resistance ri
Limits the current supplied by the voltage source to
Limits the current supplied by the voltage source to [1, p. 1215]
Category:
Interrupt
An interrupt pauses normal program flow so a designated routine can respond to an event.
An interrupt pauses normal program flow so a designated routine can respond to an event.
Category:
References
Intrinsic semiconductor
A semiconductor material with only one type of atom.
A semiconductor material with only one type of atom. [1, p. 1215]
Category:
Intrinsic standoffratio
hThe ratio of RB1 to RBB or h5 RB1 1 RB2
hThe ratio of RB1 to RBB or h5 RB1 1 RB2 [1, p. 1215]
Category:
Inverse relation
Same as reciprocal relation.
Same as reciprocal relation. As one variable increases, the other decreases. [1, p. 1215]
Category:
Inversely proportional
The same as a reciprocal relation; as the value in the denominator increases the resultant quotient decreases.
The same as a reciprocal relation; as the value in the denominator increases the resultant quotient decreases. In the formula XC 5 1 2πfC. XC is inversely proportional to both f and C. This means that as f and C increase, XC decreases. [1, p. 1215]
Category:
Investigation
Also called: Inquiry
Investigation gathers and examines information needed to understand a design problem.
Investigation gathers and examines information needed to understand a design problem. [3]
Category:
Ion
Atom or group of atoms with net charge.
Atom or group of atoms with net charge. Can be produced in liquids, gases, and doped semiconductors. [1, p. 1215]
Category:
Ionization current
A current that results from the movement of ion charges in a liquid or gas.
A current that results from the movement of ion charges in a liquid or gas. [1, p. 1215]
Category:
IP Address
Also called: Internet Protocol Address
An IP address identifies an interface for delivering packets within an Internet Protocol network.
An IP address identifies an interface for delivering packets within an Internet Protocol network.
Category:
References
IR drop
Iron-vane meter
Type of AC meter, generally for 60 Hz.
Type of AC meter, generally for 60 Hz. [1, p. 1215]
Category:
Isometric view
An isometric view represents three principal dimensions using equally scaled axes.
An isometric view represents three principal dimensions using equally scaled axes. [14]
Category:
J5 terms
J operator
Indicates 90° phase angle, as in j8 V for XL.
Indicates 90° phase angle, as in j8 V for XL. Also, 2j 8 V is at 290° for XC. [1, p. 1215]
Category:
JFET
Joint
Joule
Also called: J
Practical unit of work or energy.
Practical unit of work or energy. One joule equals one watt-second of work. [1, p. 1215]
Category:
JPEG
Also called: JPG
JPEG is a raster image format that uses lossy compression and is commonly used for photographs.
JPEG is a raster image format that uses lossy compression and is commonly used for photographs. [9]
Category:
K11 terms
Karnaugh Map
Also called: K-map
A Karnaugh map arranges truth-table values so adjacent groups can reveal a simpler Boolean expression.
A Karnaugh map arranges truth-table values so adjacent groups can reveal a simpler Boolean expression.
Category:
References
Keeper
Magnetic material placed across the poles of a magnet to form a complete magnetic circuit.
Magnetic material placed across the poles of a magnet to form a complete magnetic circuit. Used to maintain strength of magnetic field. [1, p. 1215]
Category:
Kelvin (K) scale
Absolute temperature scale, 273° below values on Celsius scale.
Absolute temperature scale, 273° below values on Celsius scale. [1, p. 1215]
Category:
Kerf
Kerf is the width of material removed by a cutting process.
Kerf is the width of material removed by a cutting process. Laser kerf varies with the machine, material, thickness, focus, power, speed, and other settings. [26]
Category:
Kernel
A kernel is the operating-system core that manages hardware resources and provides services to programs.
A kernel is the operating-system core that manages hardware resources and provides services to programs.
Category:
References
Keyframe
Kilo
Kilometres per Hour
Also called: km/h
Kilometres per hour (km/h) is a common unit of speed and velocity.
Kilometres per hour, written km/h, states how many kilometres are covered in one hour. It is commonly used for road speed in Canada and many other countries. When a direction is included, it can also be used for velocity.
Category:
Kilowatt-hour
A large unit of electrical energy corresponding to 1 kW·1 h.
A large unit of electrical energy corresponding to 1 kW·1 h. [1, p. 1215]
Category:
Kirchhoff's Current Law
Also called: KCL
Kirchhoff's current law states that the algebraic sum of currents at a node is zero.
Category:
References
L37 terms
Laminations
Thin sheets of steel insulated from one another to reduce eddy-current losses in inductors, motors, etc.
Thin sheets of steel insulated from one another to reduce eddy-current losses in inductors, motors, etc. [1, p. 1215]
Category:
Language Model
Also called: LM
A language model assigns probabilities to token sequences and can predict tokens from context.
Category:
References
Language-model Sampling
Also called: Sampling
Language-model sampling chooses an output token from a probability distribution rather than always taking only the top choice.
Language-model sampling chooses an output token from a probability distribution rather than always taking only the top choice.
Category:
References
Laser cutter
A laser cutter is a computer-controlled machine that uses a focused laser beam to cut, score, or engrave material.
A laser cutter is a computer-controlled machine that uses a focused laser beam to cut, score, or engrave material. [26]
Category:
Laser cutting
Laser focus
Layer
A layer is one deposited cross-section of a 3D-printed object.
A layer is one deposited cross-section of a 3D-printed object. [18]
Category:
Layer height
Leakage current
- The current that flows through the dielectric of a capacitor when voltage is applied across the capacitor plates.
- The current that flows through the dielectric of a capacitor when voltage is applied across the capacitor plates. (2) The very small current that flows when a diode is reverse-biased. The leakage current is mainly due to the thermally generated minority carriers that exist in both sections of the diode. [1, p. 1215]
Category:
Leakage flux
Any magnetic field lines that do not link two coils that are in close proximity to each other.
Any magnetic field lines that do not link two coils that are in close proximity to each other. [1, p. 1215]
Category:
Leakage resistance
A resistance in parallel with a capacitor that represents all of the leakage paths through which a capacitor can discharge.
A resistance in parallel with a capacitor that represents all of the leakage paths through which a capacitor can discharge. [1, p. 1215]
Category:
Least Privilege
Least privilege gives each user or process only the permissions needed for its approved task.
Least privilege gives each user or process only the permissions needed for its approved task.
Category:
References
Leclanché cell
Left-hand rule
If the coil is grasped with the fingers of the left hand curled around the coil in the direction of electron flow, the thumb points to the north pole of the coil.
If the coil is grasped with the fingers of the left hand curled around the coil in the direction of electron flow, the thumb points to the north pole of the coil. [1, p. 1215]
Category:
Lenz’s law
Induced current has magnetic field that opposes the change causing the induction.
Induced current has magnetic field that opposes the change causing the induction. [1, p. 1215]
Category:
Lettermark
Licence
Light-dependent Resistor
Also called: LDR, Photoresistor
A light-dependent resistor changes resistance as the light reaching it changes.
A light-dependent resistor changes resistance as the light reaching it changes.
Category:
References
Light-emitting diode
Also called: LED
A diode that emits a certain color light when forward-biased.
A diode that emits a certain color light when forward-biased. The color of light emitted by the diode is determined by the type of material used in the doping process. [1, p. 1215]
Category:
Linear amplifier
Any amplifier that produces an output signal that is an exact replica of the input signal.
Any amplifier that produces an output signal that is an exact replica of the input signal. [1, p. 1215]
Category:
Linear component
An electronic component whose current is proportional to the applied voltage.
An electronic component whose current is proportional to the applied voltage. [1, p. 1215]
Category:
Linear proportion
Straight-line graph between two variables.
Straight-line graph between two variables. As one increases, the other increases in direct proportion. [1, p. 1215]
Category:
Linear Regression
Linear regression fits a linear relationship between input features and a numerical target.
Linear regression fits a linear relationship between input features and a numerical target.
Category:
References
Linear resistance
A resistance with a constant value of ohms.
A resistance with a constant value of ohms. [1, p. 1215]
Category:
Linux Distribution
Also called: Distro
A Linux distribution packages the Linux kernel with system tools, applications, and an update method.
A Linux distribution packages the Linux kernel with system tools, applications, and an update method.
Category:
References
Load
Takes current from the voltage source, resulting in load current.
Takes current from the voltage source, resulting in load current. [1, p. 1215]
Category:
Load currents
The currents drawn by the electronic devices and/or components connected as loads in a loaded voltage divider.
The currents drawn by the electronic devices and/or components connected as loads in a loaded voltage divider. [1, p. 1215]
Category:
Loaded voltage
The voltage at a point in a series voltage divider where a parallel load has been connected.
The voltage at a point in a series voltage divider where a parallel load has been connected. [1, p. 1215]
Category:
Loading Effect
Logic Gate
A logic gate implements a Boolean operation on one or more digital inputs.
A logic gate implements a Boolean operation on one or more digital inputs.
Category:
References
Logo
A logo is a visual mark used to identify an organization, product, project, or person.
A logo is a visual mark used to identify an organization, product, project, or person. [8]
Category:
Long time constant
A long time constant can arbitrarily be defined as one that is five or more times longer than the pulse width of the applied voltage.
A long time constant can arbitrarily be defined as one that is five or more times longer than the pulse width of the applied voltage. [1, p. 1215]
Category:
Loop
Loop equation
An equation that specifies the voltages around a loop.
An equation that specifies the voltages around a loop. [1, p. 1215]
Category:
Loose fit
Loss Function
A loss function produces a numerical penalty that measures how far predictions are from desired results.
A loss function produces a numerical penalty that measures how far predictions are from desired results.
Category:
References
Low-pass filter
A filter that allows the lower frequency components of the applied voltage to develop appreciable output voltage while at the same time attenuating or eliminating the higher-frequency components.
A filter that allows the lower frequency components of the applied voltage to develop appreciable output voltage while at the same time attenuating or eliminating the higher-frequency components. [1, p. 1215]
Category:
M45 terms
MAC Address
Also called: Media Access Control Address
A MAC address is a link-layer identifier used to deliver frames on a local network segment.
A MAC address is a link-layer identifier used to deliver frames on a local network segment.
Category:
References
Machine-learning Bias
Also called: ML Bias
Machine-learning bias is a systematic tendency in data, modelling, or evaluation that distorts a system's results.
Machine-learning bias is a systematic tendency in data, modelling, or evaluation that distorts a system's results.
Category:
References
Machine-learning Fairness
Also called: ML Fairness
Machine-learning fairness examines whether a system's outcomes or errors create unjustified differences across people or groups.
Machine-learning fairness examines whether a system's outcomes or errors create unjustified differences across people or groups.
Category:
References
Machine-learning Feature
A machine-learning feature is an input variable supplied to a model for training or prediction.
Category:
References
Machine-learning Label
Also called: Label
A machine-learning label is the target answer associated with a supervised training example.
A machine-learning label is the target answer associated with a supervised training example.
Category:
References
Magnetic flux
Another name used to describe magnetic field lines.
Another name used to describe magnetic field lines. [1, p. 1215]
Category:
Magnetic pole
Magnetism
Effects of attraction and repulsion by iron and similar materials without the need for an external force.
Effects of attraction and repulsion by iron and similar materials without the need for an external force. Electromagnetism includes the effects of a magnetic field associated with an electric current. [1, p. 1215]
Category:
Magnetomotive force
Also called: mmf
Ability to produce magnetic lines of force.
Ability to produce magnetic lines of force. Measured in units of ampere-turns. [1, p. 1216]
Category:
Magnitude
Value of a quantity regardless of phase angle.
Value of a quantity regardless of phase angle. [1, p. 1216]
Category:
Main line
The pair of leads connecting all of the individual branches in a parallel circuit to the terminals of the applied voltage, VA.
The pair of leads connecting all of the individual branches in a parallel circuit to the terminals of the applied voltage, VA. The main line carries the total current, IT, flowing to and from the terminals of the voltage source. [1, p. 1216]
Category:
Majority current carrier
The dominant type of charge carrier in a doped semiconductor material.
The dominant type of charge carrier in a doped semiconductor material. In an n-type semiconductor free electrons are the majority current carriers whereas in a p-type semiconductor holes are the majority current carriers. [1, p. 1216]
Category:
Make and break
Material thickness
Maximum Power Transfer
Maximum working voltage rating
The maximum allowable voltage a resistor can safely withstand without internal arcing.
The maximum allowable voltage a resistor can safely withstand without internal arcing. [1, p. 1216]
Category:
Maxwell
Also called: Mx
Unit of magnetic flux equal to one line of force in the magnetic field.
Unit of magnetic flux equal to one line of force in the magnetic field. [1, p. 1216]
Category:
Measurement Uncertainty
Measurement uncertainty describes the reasonable range around a measured result caused by instrument and method limits.
Measurement uncertainty describes the reasonable range around a measured result caused by instrument and method limits.
Category:
References
Mega
Mesh current
Assumed current in a closed path, without any current division, for application of Kirchhoff’s current law.
Assumed current in a closed path, without any current division, for application of Kirchhoff’s current law. [1, p. 1216]
Category:
Metal-film resistors
Resistors made by spraying a thin film of metal onto a ceramic substrate.
Resistors made by spraying a thin film of metal onto a ceramic substrate. The metal film is cut in the form of a spiral. [1, p. 1216]
Category:
Metre
Also called: m, meter
The metre (m) is the SI base unit of length.
The metre, symbol m, is the SI base unit used to measure length. In motion problems it can describe distance or displacement.
Category:
Metres per Second
Also called: m/s
Metres per second (m/s) is a unit of speed and velocity.
Metres per second, written m/s, tells how many metres of distance or displacement are covered each second. It is a common SI unit for both speed and velocity.
Category:
Metres per Second Squared
Also called: m/s^2, m/s²
Metres per second squared (m/s²) is a unit of acceleration.
Metres per second squared, written m/s², is a unit of acceleration. A value of 1 m/s² means velocity changes by 1 metre per second during each second.
Category:
Metric Prefix
Metric prefixes
Letter symbols used to replace the powers of 10 that are multiples of 3.
Letter symbols used to replace the powers of 10 that are multiples of 3. [1, p. 1216]
Category:
Micro
Microcontroller
Also called: MCU
A microcontroller combines a processor, memory, and programmable input-output hardware on one integrated circuit.
A microcontroller combines a processor, memory, and programmable input-output hardware on one integrated circuit.
Category:
References
Microfarad
A small unit of capacitance equal to 1 × 1026 F.
A small unit of capacitance equal to 1 × 1026 F. [1, p. 1216]
Category:
Midpoint bias
A bias point that is centered between cutoffand saturation on the DC load line.
A bias point that is centered between cutoffand saturation on the DC load line. [1, p. 1216]
Category:
Miles per Hour
Also called: mph
Miles per hour (mph) is a common non-SI unit of speed and velocity.
Miles per hour, written mph, states how many miles are covered in one hour. It is common in U.S. customary and some Imperial contexts. When a direction is included, it can also be used for velocity.
Category:
Milli
Millman’s theorem
A theorem that provides a shortcut for finding the common voltage across any number of parallel branches with different voltage sources.
A theorem that provides a shortcut for finding the common voltage across any number of parallel branches with different voltage sources. [1, p. 1216]
Category:
Minority current carrier
The type of charge carrier that appears sparsely throughout a doped semiconductor material.
The type of charge carrier that appears sparsely throughout a doped semiconductor material. In an n-type semiconductor, holes are the minority current carriers whereas free electrons are the minority current carriers in a p-type semiconductor. [1, p. 1216]
Category:
Mirror
Mks
Meter-kilogram-second system of units.
Meter-kilogram-second system of units. [1, p. 1216]
Category:
Modifier
A modifier applies a non-destructive operation that changes how Blender geometry is evaluated or displayed.
A modifier applies a non-destructive operation that changes how Blender geometry is evaluated or displayed. [16]
Category:
Molecules
The smallest unit of a compound with the same chemical characteristics.
The smallest unit of a compound with the same chemical characteristics. [1, p. 1216]
Category:
Monostable Multivibrator
Also called: Monostable, One-shot
A monostable multivibrator has one stable state and produces a timed pulse when triggered.
Category:
References
MOSFET
Metal-oxide-semiconductor field effect transistor.
Metal-oxide-semiconductor field effect transistor. [1, p. 1216]
Category:
Motor
A device that produces mechanical motion from electric energy.
A device that produces mechanical motion from electric energy. [1, p. 1216]
Category:
Motor action
A motion that results from the net force of two magnetic fields that can aid or cancel each other.
A motion that results from the net force of two magnetic fields that can aid or cancel each other. The direction of the resultant force is always from a stronger field to a weaker field. [1, p. 1216]
Category:
Mount
Also called: Mount a Filesystem
To mount a filesystem is to attach it at a directory so its files become accessible.
To mount a filesystem is to attach it at a directory so its files become accessible.
Category:
References
Multiplier resistor
Resistor in series with a meter movement for voltage ranges.
Resistor in series with a meter movement for voltage ranges. [1, p. 1216]
Category:
Mutual induction
Ability of one coil to induce voltage in another coil.
Ability of one coil to induce voltage in another coil. [1, p. 1216]
Category:
N28 terms
N-gram
An n-gram is an ordered sequence of n adjacent tokens used to model local patterns.
An n-gram is an ordered sequence of n adjacent tokens used to model local patterns.
Category:
References
N-type semiconductor
A semiconductor that has been doped with pentavalent impurity atoms.
A semiconductor that has been doped with pentavalent impurity atoms. The result is a large number of free electrons throughout the material. Since the electron is the basic particle of negative charge, the material is called n-type semiconductor material. [1, p. 1216]
Category:
NAND Gate
A NAND gate outputs the inverse of AND, so it outputs 0 only when every input is 1.
A NAND gate outputs the inverse of AND, so it outputs 0 only when every input is 1.
Category:
References
Nano
Nanofarad
A small unit of capacitance equal to 1 × 1029 F.
A small unit of capacitance equal to 1 × 1029 F. [1, p. 1216]
Category:
NC
Normally closed for relay contacts, or no connection for pinout diagrams.
Normally closed for relay contacts, or no connection for pinout diagrams. [1, p. 1216]
Category:
Necessity
A necessity is a requirement that must be met for a design to be acceptable.
A necessity is a requirement that must be met for a design to be acceptable. [3]
Category:
Need
A need is a problem or condition that a design is intended to address.
A need is a problem or condition that a design is intended to address. [3]
Category:
Negative feedback
A form of amplifier feedback where the returning signal has a phase that opposes the input signal.
A form of amplifier feedback where the returning signal has a phase that opposes the input signal. [1, p. 1216]
Category:
Negative saturation voltage
Also called: 2Vsat
The lower limit of output voltage for an op amp.
The lower limit of output voltage for an op amp. [1, p. 1216]
Category:
Negative space
Negative space is the unoccupied area around or within visible shapes.
Negative space is the unoccupied area around or within visible shapes. [8]
Category:
Negative temperature coefficient
Also called: NTC
A characteristic of a thermistor indicating that its resistance decreases with an increase in operating temperature.
A characteristic of a thermistor indicating that its resistance decreases with an increase in operating temperature. [1, p. 1216]
Category:
Network Port
Also called: Port
A network port number identifies a transport-layer endpoint used by an application or service.
A network port number identifies a transport-layer endpoint used by an application or service.
Category:
References
Network Protocol
Also called: Protocol
A network protocol defines rules and message formats that communicating systems follow.
A network protocol defines rules and message formats that communicating systems follow.
Category:
References
Neural Network
A neural network is a layered model that learns parameterized transformations from examples.
A neural network is a layered model that learns parameterized transformations from examples.
Category:
References
Neutron
Particle without electric charge in the nucleus of an atom.
Particle without electric charge in the nucleus of an atom. [1, p. 1216]
Category:
Nice-to-have
Node
Also called: Anchor point, Path node
A node is an editable point that defines part of a vector path.
A node is an editable point that defines part of a vector path. [8]
Category:
Nominal dimension
Nonlinear resistance
A resistance whose value changes as a result of current producing power dissipation and heat in the resistance.
A resistance whose value changes as a result of current producing power dissipation and heat in the resistance. [1, p. 1216]
Category:
Nonsinusoidal waveform
Any waveform that is not a sine or a cosine wave.
Any waveform that is not a sine or a cosine wave. [1, p. 1216]
Category:
NOR Gate
A NOR gate outputs the inverse of OR, so it outputs 1 only when every input is 0.
A NOR gate outputs the inverse of OR, so it outputs 1 only when every input is 0.
Category:
References
Norton Equivalent
A Norton equivalent represents a linear two-terminal network as an ideal current source in parallel with a resistance.
A Norton equivalent represents a linear two-terminal network as an ideal current source in parallel with a resistance.
Category:
References
Norton’s theorem
Method of reducing a complicated network to one current source with shunt resistance.
Method of reducing a complicated network to one current source with shunt resistance. [1, p. 1216]
Category:
NOT Gate
Also called: Inverter
A NOT gate outputs the opposite logic value from its input.
A NOT gate outputs the opposite logic value from its input.
Category:
References
Nucleus
The massive, stable part of the atom which contains both protons and neutrons.
The massive, stable part of the atom which contains both protons and neutrons. [1, p. 1216]
Category:
O22 terms
Obtuse angle
Octave
Oersted
Also called: Oe
Unit of magnetic field intensity; 1
Unit of magnetic field intensity; 1 [1, p. 1216]
Category:
Ohm
Also called: ohms
The ohm (Ω) is the SI unit of electrical resistance.
The ohm, symbol Ω, is the SI unit used to measure electrical resistance. In a simple resistive circuit, 1 ohm of resistance allows 1 ampere of current when 1 volt is applied.
Category:
Ohmic region
The region of operation for a JFET where the drain current, ID, increases in direct proportion to VDS.
The region of operation for a JFET where the drain current, ID, increases in direct proportion to VDS. The ohmic region of operation exists when VDS, VP. [1, p. 1216]
Category:
Ohms-per-volt rating
Sensitivity rating for a voltmeter.
Sensitivity rating for a voltmeter. High rating means less meter loading. [1, p. 1216]
Category:
Ohm’s law
Onion skinning
Opacity
Opacity controls how solid or see-through an object or layer appears.
Opacity controls how solid or see-through an object or layer appears. Lower opacity lets more of the content underneath show through.
Category:
References
Open circuit
One that has infinitely high resistance, resulting in zero current.
One that has infinitely high resistance, resulting in zero current. [1, p. 1216]
Category:
Open-circuit voltage
The voltage present across the output terminals of a voltage source when no load is present.
The voltage present across the output terminals of a voltage source when no load is present. [1, p. 1216]
Category:
Open-loop Control
Open-loop control applies a command without using measured output to correct the action.
Open-loop control applies a command without using measured output to correct the action.
Category:
References
Open-loop cutofffrequency
Also called: fOL
The frequency at which the open-loop voltage gain of an op amp is down to 70.7% of its maximum value at DC.
The frequency at which the open-loop voltage gain of an op amp is down to 70.7% of its maximum value at DC. [1, p. 1216]
Category:
Open-loop voltage gain
Also called: A VOL
The voltage gain of an op amp without negative feedback.
The voltage gain of an op amp without negative feedback. [1, p. 1216]
Category:
Operating System
Also called: OS
An operating system manages computer resources and provides services and interfaces for applications and users.
An operating system manages computer resources and provides services and interfaces for applications and users.
Category:
References
Operational Amplifier
OR Gate
An OR gate outputs 1 when at least one input is 1.
An OR gate outputs 1 when at least one input is 1.
Category:
References
Orthographic projection
Also called: Orthographic drawing
Orthographic projection represents an object with separate perpendicular views without perspective shortening.
Orthographic projection represents an object with separate perpendicular views without perspective shortening. [14]
Category:
Oscilloscope
A piece of test equipment used to view and measure a variety of different AC waveforms.
A piece of test equipment used to view and measure a variety of different AC waveforms. [1, p. 1216]
Category:
Output impedance
Also called: Zout
The impedance at the output of an amplifier as seen by the load being driven by the amplifier.
The impedance at the output of an amplifier as seen by the load being driven by the amplifier. [1, p. 1216]
Category:
Overfitting
Overfitting occurs when a model fits training data so specifically that it performs poorly on new examples.
Overfitting occurs when a model fits training data so specifically that it performs poorly on new examples.
Category:
References
P81 terms
P-type semiconductor
A semiconductor that has been doped with trivalent impurity atoms.
A semiconductor that has been doped with trivalent impurity atoms. The result is a large number of holes in the material. Since a hole exhibits a positive charge, the material is called p-type semiconductor material. [1, p. 1217]
Category:
Package Manager
A package manager installs, removes, and updates software from configured package sources while tracking dependencies.
A package manager installs, removes, and updates software from configured package sources while tracking dependencies.
Category:
References
Parallel bank
A combination of parallel- connected branches.
A combination of parallel- connected branches. [1, p. 1216]
Category:
Parallel Circuit
Paramagnetic
Material that can be weakly magnetized in the same direction from the magnetizing force.
Material that can be weakly magnetized in the same direction from the magnetizing force. [1, p. 1216]
Category:
Parametric modelling
Also called: Parametric design, Parametric modeling
Parametric modelling controls geometry with dimensions, constraints, and ordered features that can be edited.
Parametric modelling controls geometry with dimensions, constraints, and ordered features that can be edited. [14]
Category:
Part
Passive component
Components such as resistors, capacitors, and inductors.
Components such as resistors, capacitors, and inductors. They do not generate voltage or control current. [1, p. 1216]
Category:
Pattern
A pattern creates repeated copies of geometry or features using defined spacing or rotation.
A pattern creates repeated copies of geometry or features using defined spacing or rotation. [14]
Category:
PC board
PCB Footprint
Also called: Footprint
A PCB footprint defines the pads, holes, outline, and placement information for a physical component.
A PCB footprint defines the pads, holes, outline, and placement information for a physical component.
Category:
References
Peak inverse voltage
Also called: PIV
The maximum instantaneous reverse-bias voltage across a diode.
The maximum instantaneous reverse-bias voltage across a diode. [1, p. 1216]
Category:
Peak reverse voltage rating
Also called: VROM
The maximum reverse-bias voltage that can be safely applied between the anode and cathode terminals of an SCR with the gate open.
The maximum reverse-bias voltage that can be safely applied between the anode and cathode terminals of an SCR with the gate open. [1, p. 1216]
Category:
Peak value
Maximum amplitude, in either polarity; 1.414 times rms value for sine- wave V or I.
Maximum amplitude, in either polarity; 1.414 times rms value for sine- wave V or I. [1, p. 1216]
Category:
Peak-to-peak value
Also called: p-p
Amplitude between opposite peaks.
Amplitude between opposite peaks. [1, p. 1216]
Category:
Pen Tool
The Pen Tool creates vector paths by placing anchor points.
The Pen Tool creates vector paths by placing anchor points. Clicking makes straight segments, while dragging an anchor point can make a curve.
Category:
References
Pentavalent atom
Percent efficiency
For an amplifier, this refers to the percentage of DC input power that is converted to useful AC output power.
For an amplifier, this refers to the percentage of DC input power that is converted to useful AC output power. [1, p. 1216]
Category:
Perfboard
Perimeter wall
Period
Also called: T
The amount of time it takes to complete one cycle of alternating voltage or current.
The amount of time it takes to complete one cycle of alternating voltage or current. [1, p. 1216]
Category:
Permanent magnet
Also called: PM
It has magnetic poles produced by internal atomic structure.
It has magnetic poles produced by internal atomic structure. No external current needed. [1, p. 1216]
Category:
Permeability
Ability to concentrate magnetic lines of force.
Ability to concentrate magnetic lines of force. [1, p. 1216]
Category:
Personal information
Personal information is recorded information about an identifiable individual.
Personal information is recorded information about an identifiable individual. [7]
Category:
Phase angle
u(1) Angle between two phasors; denotes time shift.
u(1) Angle between two phasors; denotes time shift. (2) The angle between the applied voltage and current in a sine- wave AC circuit. [1, p. 1216]
Category:
Phasing dots
Used on transformer windings to identify those leads having the same instantaneous polarity.
Used on transformer windings to identify those leads having the same instantaneous polarity. [1, p. 1216]
Category:
Phasor
A line representing magnitude and direction of a quantity, such as voltage or current, with respect to time.
A line representing magnitude and direction of a quantity, such as voltage or current, with respect to time. [1, p. 1216]
Category:
Phasor triangle
A right triangle that represents the phasor sum of two quantities 90° out of phase with each other.
A right triangle that represents the phasor sum of two quantities 90° out of phase with each other. [1, p. 1216]
Category:
Photoshop Document (PSD)
Also called: PSD
A Photoshop Document is an editable image file that can keep layers, shapes, and other document structure.
A Photoshop Document uses the PSD file format to keep editable document structure, including layers and vector shapes. Save a PSD when you may need to revise the work later.
Category:
References
Pickup current
The minimum amount of current required to energize a relay.
The minimum amount of current required to energize a relay. [1, p. 1216]
Category:
Pico
Picofarad
A small unit of capacitance equal to 1 × 10212 F.
A small unit of capacitance equal to 1 × 10212 F. [1, p. 1217]
Category:
PID Control
Also called: Proportional Integral Derivative Control
PID control combines proportional, integral, and derivative responses to the control error.
PID control combines proportional, integral, and derivative responses to the control error.
Category:
References
Pilot hole
Pinch-offvoltage
Also called: VP
The drain-source voltage at which the drain current, ID, levels off.
The drain-source voltage at which the drain current, ID, levels off. VP is the border between the ohmic and current- source regions of operation. [1, p. 1217]
Category:
Ping
Ping tests reachability and round-trip response using Internet Control Message Protocol echo messages.
Ping tests reachability and round-trip response using Internet Control Message Protocol echo messages.
Category:
References
Pixel
A pixel is one addressable picture element in a raster image or display.
A pixel is one addressable picture element in a raster image or display. [9]
Category:
PNG
Also called: Portable Network Graphics
PNG is a lossless raster image format that supports transparency.
PNG is a lossless raster image format that supports transparency. [9]
Category:
Polar form
Form of complex numbers that gives magnitude and phase angle in the form A/u 8.
Form of complex numbers that gives magnitude and phase angle in the form A/u 8. [1, p. 1217]
Category:
Polarity
Property of electric charge and voltage.
Property of electric charge and voltage. Negative polarity is excess of electrons. Positive polarity means deficiency of electrons. [1, p. 1217]
Category:
Pole
The number of completely isolated circuits that can be controlled by a switch.
The number of completely isolated circuits that can be controlled by a switch. [1, p. 1217]
Category:
Polygon mesh
Position
Position describes where an object is relative to a chosen reference point.
Position describes an object's location relative to a chosen reference point or coordinate system. A change in position is displacement.
Category:
Positive saturation voltage
Also called: 1Vsat
The upper limit of output voltage for an op amp.
The upper limit of output voltage for an op amp. [1, p. 1217]
Category:
Positive temperature coefficient
Also called: PTC
A characteristic of a thermistor indicating that its resistance increases with an increase in operating temperature.
A characteristic of a thermistor indicating that its resistance increases with an increase in operating temperature. [1, p. 1217]
Category:
Potentiometer
Also called: Pot
A potentiometer is a three-terminal adjustable resistor commonly used as a variable voltage divider.
A potentiometer is a three-terminal adjustable resistor commonly used as a variable voltage divider.
Category:
References
Power
Power amplifier
A circuit that is designed to deliver large amounts of power to a low impedance load.
A circuit that is designed to deliver large amounts of power to a low impedance load. [1, p. 1217]
Category:
Power bandwidth
Also called: fmax
The highest undistorted frequency out of an op amp without slew- rate distortion.
The highest undistorted frequency out of an op amp without slew- rate distortion. [1, p. 1217]
Category:
Power factor
Cosine of the phase angle for a sine-wave AC circuit.
Cosine of the phase angle for a sine-wave AC circuit. Value is between 1 and 0. [1, p. 1217]
Category:
Power gain
Also called: AP
The ratio of output power to input power in a transistor amplifier.
The ratio of output power to input power in a transistor amplifier. AP can also be calculated as [1, p. 1217]
Category:
Power supply
A piece of test equipment used to supply DC voltage and current to electronic circuits under test.
A piece of test equipment used to supply DC voltage and current to electronic circuits under test. [1, p. 1217]
Category:
Power Supply Unit
Also called: PSU
A computer power supply unit converts input power into regulated outputs for the computer's components.
A computer power supply unit converts input power into regulated outputs for the computer's components.
Category:
References
Power-on Self-test
Also called: POST
A power-on self-test is firmware's initial check of essential hardware during startup.
A power-on self-test is firmware's initial check of essential hardware during startup.
Category:
References
Powers of 10
A numerical representation consisting of a base of 10 and an exponent; the base 10 raised to a power.
A numerical representation consisting of a base of 10 and an exponent; the base 10 raised to a power. [1, p. 1217]
Category:
Precision
Also called: Classification Precision
Precision is the fraction of positive predictions that are actually positive.
Precision is the fraction of positive predictions that are actually positive.
Category:
References
Preferred values
Common values of resistors and capacitors generally available.
Common values of resistors and capacitors generally available. [1, p. 1217]
Category:
Press fit
Primary source
Primary winding
Transformer coil connected to the source voltage.
Transformer coil connected to the source voltage. [1, p. 1217]
Category:
Principal node
A common connection for three or more components in a circuit where currents can combine or divide.
A common connection for three or more components in a circuit where currents can combine or divide. [1, p. 1217]
Category:
Print orientation
Print orientation is the direction and position in which a model is placed on the build plate.
Print orientation is the direction and position in which a model is placed on the build plate. [20]
Category:
Printed Circuit Board
Printed wiring
Conducting paths printed on plastic board.
Conducting paths printed on plastic board. [1, p. 1217]
Category:
Privacy
Privacy is a person's ability to control how information about them is collected, used, disclosed, and retained.
Privacy is a person's ability to control how information about them is collected, used, disclosed, and retained. [7]
Category:
Process
Also called: Computer Process
A process is a running instance of a program with its own execution state and assigned resources.
A process is a running instance of a program with its own execution state and assigned resources.
Category:
References
Programming Loop
A loop repeats a block of instructions while a condition or sequence controls the repetition.
A loop repeats a block of instructions while a condition or sequence controls the repetition.
Category:
References
Prompt
A prompt is input that instructs or provides context to a generative-AI system.
A prompt is input that instructs or provides context to a generative-AI system. [5]
Category:
Proportional
A mathematical term used to describe the relationship between two quantities.
A mathematical term used to describe the relationship between two quantities. For example, in the formula The term proportional means that if either f or L is doubled XL will double. Similarly, if either f or L is reduced by one-half, XL will be reduced by one-half. In other words, XL will increase or decrease in direct proportion to either f or L. [1, p. 1217]
Category:
Proportional Control
Proportional control makes controller output change in proportion to the current error.
Proportional control makes controller output change in proportion to the current error.
Category:
References
Proton
Particle with positive charge in the nucleus of an atom.
Particle with positive charge in the nucleus of an atom. [1, p. 1217]
Category:
Prototype
A prototype is a model or early version built to test a design idea.
A prototype is a model or early version built to test a design idea. It may test only selected features rather than reproduce the final product. [3]
Category:
Provenance
Provenance records where content or data came from and how it changed.
Provenance records where content or data came from and how it changed. [5]
Category:
Pseudocode
Pseudocode expresses an algorithm in structured plain language without requiring a programming language's exact syntax.
Pseudocode expresses an algorithm in structured plain language without requiring a programming language's exact syntax.
Category:
References
Pull-down Resistor
Pull-up Resistor
Also called: Grounded Switch, Grounded Switch Input, Pullup Resistor
A pull-up resistor weakly holds an input high while a grounded switch can pull it low when pressed.
A pull-up resistor weakly holds an input high while a grounded switch can pull it low when pressed.
Category:
References
Pulsating DC
A DC voltage or current that varies in magnitude but does not reverse in polarity or direction.
A DC voltage or current that varies in magnitude but does not reverse in polarity or direction. Another name for pulsating DC is fluctuating DC. Includes AC component on average DC axis. [1, p. 1217]
Category:
Pulse
A sharp rise and decay of voltage or current of a specific peak value for a brief period of time.
A sharp rise and decay of voltage or current of a specific peak value for a brief period of time. [1, p. 1217]
Category:
Pulse-width Modulation
Also called: PWM
Pulse-width modulation controls average delivered output by changing the fraction of each cycle spent on.
Pulse-width modulation controls average delivered output by changing the fraction of each cycle spent on.
Category:
References
Q3 terms
Q of a coil
The quality or figure of merit for a coil.
The quality or figure of merit for a coil. More specifically, the Q of a coil can be defined as the ratio of reactive power in the inductance to the real power dissipated in the coil’s resistance. Q 5 XL ri. [1, p. 1217]
Category:
Q point
The values of IC and VCE that exist in a transistor amplifier with no AC signal present.
The values of IC and VCE that exist in a transistor amplifier with no AC signal present. [1, p. 1217]
Category:
Quadrature phase
R39 terms
Radian
Also called: rad
Angle of 57.3°.
Angle of 57.3°. Complete circle includes 2π rad. [1, p. 1217]
Category:
Radio frequency
Also called: rf
A frequency high enough to be radiated efficiently as electromagnetic waves, generally above 30 kHz.
A frequency high enough to be radiated efficiently as electromagnetic waves, generally above 30 kHz. Usually much higher. [1, p. 1217]
Category:
Ramp
Sawtooth waveform with linear change in V or I.
Sawtooth waveform with linear change in V or I. [1, p. 1217]
Category:
Raster engraving
Raster image
Also called: Bitmap image, Raster, Raster graphic
A raster image stores an image as a grid of pixels.
A raster image stores an image as a grid of pixels. [9]
Category:
Ratio arm
Accurate, stable resistors in one leg of a Wheatstone bridge or bridge circuit in general.
Accurate, stable resistors in one leg of a Wheatstone bridge or bridge circuit in general. The ratio arm fraction, R1 R2, can be varied in most cases, typically in multiples of 10. The ratio arm fraction in a Wheatstone bridge determines two things; the placement accuracy of the measurement of an unknown resistor, Rx, and the maximum unknown resistance, Rx(max), that can be measured. [1, p. 1217]
Category:
RC phase-shifter
An application of a series RC circuit in which the output across either R or C provides a desired phase shift with respect to the input voltage.
An application of a series RC circuit in which the output across either R or C provides a desired phase shift with respect to the input voltage. RC phase-shifter circuits are commonly used to control the conduction time of semiconductors in power control circuits. [1, p. 1217]
Category:
Reactance
Property of L and C to oppose flow of I that is varying.
Property of L and C to oppose flow of I that is varying. Symbol is XC or XL. Unit is the ohm. [1, p. 1217]
Category:
Real number
Any positive or negative number not containing j.
Any positive or negative number not containing j. (A 1 jB) is a complex number but A and B by themselves are real numbers. [1, p. 1217]
Category:
Real power
The net power consumed by resistance.
The net power consumed by resistance. Measured in watts. [1, p. 1217]
Category:
Recall
Also called: Sensitivity, True Positive Rate
Recall is the fraction of actual positive examples that a classifier correctly identifies.
Recall is the fraction of actual positive examples that a classifier correctly identifies.
Category:
References
Reciprocal relation
Same as inverse relation.
Same as inverse relation. As one variable increases, the other decreases. [1, p. 1217]
Category:
Reciprocal resistance formula
A formula that states that the equivalent resistance, REQ, of a parallel circuit equals the reciprocal of the sum of the reciprocals of the individual branch resistances.
A formula that states that the equivalent resistance, REQ, of a parallel circuit equals the reciprocal of the sum of the reciprocals of the individual branch resistances. [1, p. 1217]
Category:
Recommendation System
Also called: Recommender System
A recommendation system selects and ranks items that may be useful or relevant to a user or context.
A recommendation system selects and ranks items that may be useful or relevant to a user or context.
Category:
References
Rectangular form
Representation of a complex number in the form A 1 jB.
Representation of a complex number in the form A 1 jB. [1, p. 1217]
Category:
Rectification
Rectification is the process of converting alternating current into a one-directional electrical output.
Rectification is the process of converting alternating current into a one-directional electrical output.
Category:
References
Rectifier
A rectifier uses directional devices such as diodes to convert alternating current into one-directional output.
A rectifier uses directional devices such as diodes to convert alternating current into one-directional output.
Category:
References
Reflected impedance
The value of impedance reflected back into the primary from the secondary.
The value of impedance reflected back into the primary from the secondary. [1, p. 1217]
Category:
Relative path
Relative permeability
Also called: mr
The ability of a material to concentrate magnetic flux.
The ability of a material to concentrate magnetic flux. Mathematically, relative permeability, designated μr, is a ratio of the flux density (B) in a material such as iron to the flux density, B, in air. There are no units for μr because it is comparison of two flux densities and the units cancel. [1, p. 1217]
Category:
Relative permittivity (r)
A factor that indicates the ability of an insulator to concentrate electric flux, also known as the dielectric constant, K.
A factor that indicates the ability of an insulator to concentrate electric flux, also known as the dielectric constant, K. [1, p. 1217]
Category:
Relay
A relay uses an electrically controlled actuator to open or close one or more separate contacts.
A relay uses an electrically controlled actuator to open or close one or more separate contacts.
Category:
References
Relay chatter
Rendering
Rendering calculates a final image from a three-dimensional scene, its materials, lights, and camera.
Rendering calculates a final image from a three-dimensional scene, its materials, lights, and camera. [16]
Category:
Reproducibility
Reproducibility is the ability to obtain a consistent result by following the documented inputs and procedure.
Reproducibility is the ability to obtain a consistent result by following the documented inputs and procedure. [4]
Category:
Requirement
A requirement is a condition or capability that a design must satisfy.
A requirement is a condition or capability that a design must satisfy. [3]
Category:
Residual
A residual is the difference between an observed target value and the value predicted by a model.
A residual is the difference between an observed target value and the value predicted by a model.
Category:
References
Resistance
Also called: R
Resistance is opposition to electric current.
Electrical resistance describes how strongly a component or material opposes electric current. The common quantity symbol is R and the SI unit is the ohm (Ω). For a simple resistive circuit, voltage, current, and resistance are related by V = I × R.
Category:
Resistance wire
A conductor having a high resistance value.
A conductor having a high resistance value. [1, p. 1217]
Category:
Resonance
Condition of XL 5 XC in an LC circuit to favor the resonant frequency for a maximum in V, I, or Z.
Condition of XL 5 XC in an LC circuit to favor the resonant frequency for a maximum in V, I, or Z. [1, p. 1217]
Category:
Resonant frequency
The frequency at which the inductive reactance, XL and the capacitive reactance, XC of an LC circuit are equal.
The frequency at which the inductive reactance, XL and the capacitive reactance, XC of an LC circuit are equal. [1, p. 1217]
Category:
Responsive design
Retrieval-augmented Generation
Also called: RAG
Retrieval-augmented generation supplies selected external information to a generative model as context for its response.
Retrieval-augmented generation supplies selected external information to a generative model as context for its response.
Category:
References
Reverse bias
Revolve
Revolve creates or removes three-dimensional volume by rotating a sketch region around an axis.
Revolve creates or removes three-dimensional volume by rotating a sketch region around an axis. [14]
Category:
Rheostat
Variable resistor with two terminals to vary I.
Variable resistor with two terminals to vary I. [1, p. 1217]
Category:
Ringing
Ability of an LC circuit to oscillate after a sharp change in V or I.
Ability of an LC circuit to oscillate after a sharp change in V or I. [1, p. 1217]
Category:
Root-mean-square (rms) value
For sine-wave AC waveform, 0.707 of peak value.
For sine-wave AC waveform, 0.707 of peak value. Also called effective value. [1, p. 1217]
Category:
Rotor
S98 terms
S.O. N.I.C.E. Design Process
Also called: N.I.C.E., S.O. N.I.C.E.
S.O. N.I.C.E. is a classroom design cycle: Situation & Opportunity → Needs & Necessities → Investigate & Inquire → Create & Communicate → Evaluate → repeat.
The S.O. N.I.C.E. Design Process begins by understanding the situation and identifying an opportunity to make it better. It then moves through Needs & Necessities → Investigate & Inquire → Create & Communicate → Evaluate → repeat. [3, Appendix I]
Category:
Safety Interlock
Also called: Interlock
A safety interlock permits operation only when required protective conditions are satisfied.
A safety interlock permits operation only when required protective conditions are satisfied.
Category:
References
Saturation
The region of transistor operation where the collector current no longer increases with further increases in base current.
The region of transistor operation where the collector current no longer increases with further increases in base current. [1, p. 1217]
Category:
Saturation region
The region to the right of the valley point, on the characteristic curve of a UJT.
The region to the right of the valley point, on the characteristic curve of a UJT. [1, p. 1217]
Category:
Sawtooth wave
One in which amplitude values have a slow linear rise or fall and a sharp change back to the starting value.
One in which amplitude values have a slow linear rise or fall and a sharp change back to the starting value. Same as a linear ramp. [1, p. 1217]
Category:
Scalable Vector Graphics
Also called: SVG
SVG is a text-based web format for describing two-dimensional vector graphics.
SVG is a text-based web format for describing two-dimensional vector graphics. Inkscape can edit SVG paths and document dimensions for this curriculum's fabrication workflows. [8, Sec. 1.1]
Category:
Scalar
Schmitt trigger
An op-amp comparator that utilizes positive feedback.
An op-amp comparator that utilizes positive feedback. [1, p. 1217]
Category:
Scientific Notation
Scientific notation writes a value as a coefficient from 1 up to 10 multiplied by a power of ten.
Scientific notation writes a value as a coefficient from 1 up to 10 multiplied by a power of ten.
Category:
References
Scoring
Also called: Laser scoring
Laser scoring marks a vector path on the surface without cutting fully through the material.
Laser scoring marks a vector path on the surface without cutting fully through the material. [26]
Category:
Screw
Sculpting
Secondary cell or battery
Secondary winding
Transformer coil connected to the load.
Transformer coil connected to the load. [1, p. 1218]
Category:
Secure Shell
Also called: SSH
Secure Shell provides authenticated, confidential remote login and related services over an untrusted network.
Secure Shell provides authenticated, confidential remote login and related services over an untrusted network.
Category:
References
Self-inductance
Inductance produced in a coil by current in the coil itself.
Inductance produced in a coil by current in the coil itself. [1, p. 1218]
Category:
Semiconductor
A material that is neither a good conductor nor a good insulator.
A material that is neither a good conductor nor a good insulator. [1, p. 1218]
Category:
Sequential Logic
Serial Communication
Serial communication transfers data as an ordered stream of bits over one or a small number of signal paths.
Serial communication transfers data as an ordered stream of bits over one or a small number of signal paths.
Category:
References
Series Circuit
Series components
Components that are connected in the same current path.
Components that are connected in the same current path. [1, p. 1218]
Category:
Series opposing
A connection of coils in which the coil current produces opposing magnetic fields for each coil.
A connection of coils in which the coil current produces opposing magnetic fields for each coil. [1, p. 1218]
Category:
Series string
Series-aiding
A connection of coils in which the coil current produces the same direction of magnetic field for both coils.
A connection of coils in which the coil current produces the same direction of magnetic field for both coils. [1, p. 1218]
Category:
Series-aiding voltages
Voltage sources that are connected so that the polarities of the individual sources aid each other in producing current in the same direction in the circuit.
Voltage sources that are connected so that the polarities of the individual sources aid each other in producing current in the same direction in the circuit. [1, p. 1218]
Category:
Series-opposing voltages
Voltage sources that are connected so that the polarities of the individual sources will oppose each other in producing current flow in the circuit.
Voltage sources that are connected so that the polarities of the individual sources will oppose each other in producing current flow in the circuit. [1, p. 1218]
Category:
Server
A server is a program or device that provides a service in response to client requests.
Category:
References
Serviceability
Serviceability is the ease with which a product can be inspected, maintained, repaired, or have parts replaced.
Serviceability is the ease with which a product can be inspected, maintained, repaired, or have parts replaced. [23]
Category:
Set Focus
Setpoint
A setpoint is the target value that a control system tries to make its measured output follow.
A setpoint is the target value that a control system tries to make its measured output follow.
Category:
References
Shape layer
Shell Pipeline
Also called: Pipe, Pipeline
A shell pipeline connects the output of one command to the input of the next command.
A shell pipeline connects the output of one command to the input of the next command.
Category:
References
Shell Redirection
Also called: Redirection
Shell redirection changes where a command reads input or sends output and error streams.
Shell redirection changes where a command reads input or sends output and error streams.
Category:
References
Shield
Metal enclosure preventing interference from radio waves.
Metal enclosure preventing interference from radio waves. [1, p. 1218]
Category:
Short circuit
Has zero resistance, resulting in excessive current.
Has zero resistance, resulting in excessive current. [1, p. 1218]
Category:
Short time constant
A short time constant can arbitrarily be defined as one that is one-fifth or less the time of the pulse width of the applied voltage.
A short time constant can arbitrarily be defined as one that is one-fifth or less the time of the pulse width of the applied voltage. [1, p. 1218]
Category:
Shunt resistor
A parallel connection.
A parallel connection. A device to increase the range of an ammeter. [1, p. 1218]
Category:
SI
Abbreviation for Système International, a system of practical units based on the meter, kilogram, second, ampere, kelvin, mole, and candela.
Abbreviation for Système International, a system of practical units based on the meter, kilogram, second, ampere, kelvin, mole, and candela. [1, p. 1218]
Category:
Side view
A side view is an orthographic view looking directly at one side of an object.
A side view is an orthographic view looking directly at one side of an object. [14]
Category:
Siemens
Also called: S
Unit of conductance.
Unit of conductance. Reciprocal of ohms unit. [1, p. 1218]
Category:
Significant Figures
Also called: Sig Figs
Significant figures communicate which digits in a measured or calculated value carry meaningful precision.
Significant figures communicate which digits in a measured or calculated value carry meaningful precision.
Category:
References
Silicon
Semiconductor element used for transistors, diodes, and integrated circuits.
Semiconductor element used for transistors, diodes, and integrated circuits. [1, p. 1218]
Category:
Silicon controlled rectifier
Also called: SCR
A unidirectional semiconductor device, like a diode, that remains in a nonconducting state, although forward-biased, until the forward breakover voltage is reached.
A unidirectional semiconductor device, like a diode, that remains in a nonconducting state, although forward-biased, until the forward breakover voltage is reached. Once conducting, the voltage across the SCR drops to a very low value. [1, p. 1218]
Category:
Sine
Trigonometric function of an angle, equal to the ratio of the opposite side to the hypotenuse in a right triangle.
Trigonometric function of an angle, equal to the ratio of the opposite side to the hypotenuse in a right triangle. [1, p. 1218]
Category:
Sine wave
One in which amplitudes vary in proportion to the sine function of an angle.
One in which amplitudes vary in proportion to the sine function of an angle. [1, p. 1218]
Category:
Skin effect
A term used to describe current flowing on the outer surface of a conductor at very high frequencies.
A term used to describe current flowing on the outer surface of a conductor at very high frequencies. Skin effect causes the effective resistance of a coil to increase at higher frequencies because the effect is the same as reducing the cmil area of the wire. [1, p. 1218]
Category:
Slew rate
Also called: S R
An op-amp specification indicating the maximum rate at which the output voltage can change.
An op-amp specification indicating the maximum rate at which the output voltage can change. SR is specified in V μs. [1, p. 1218]
Category:
Slew-rate distortion
A distortion that occurs in op amps when the rate of change in output voltage tries to exceed the slew rate capabilities of the op amp.
A distortion that occurs in op amps when the rate of change in output voltage tries to exceed the slew rate capabilities of the op amp. [1, p. 1218]
Category:
Slicer
Also called: Slicing software
A slicer converts a 3D model into layered machine instructions and print settings.
A slicer converts a 3D model into layered machine instructions and print settings. [20]
Category:
Sliding fit
Slip rings
In an AC generator, devices that provide connections to the rotor.
In an AC generator, devices that provide connections to the rotor. [1, p. 1218]
Category:
Slot
Slow-blow fuse
A type of fuse that can handle a temporary surge current that exceeds the current rating of the fuse.
A type of fuse that can handle a temporary surge current that exceeds the current rating of the fuse. This type of fuse has an element with a coiled construction and is designed to open only on a continued overload such as short- circuit. [1, p. 1218]
Category:
Small signal
Smoothing Filter
Also called: Smoothing
A smoothing filter reduces ripple or rapid variation in a rectified or regulated output.
A smoothing filter reduces ripple or rapid variation in a rectified or regulated output.
Category:
References
Snug fit
Solder
Alloy of tin and lead used for fusing wire connections.
Alloy of tin and lead used for fusing wire connections. [1, p. 1218]
Category:
Soldering
Soldering joins conductors by heating the connection and flowing a lower-melting filler metal into it.
Soldering joins conductors by heating the connection and flowing a lower-melting filler metal into it.
Category:
References
Solenoid
Solid modelling
Also called: Solid modeling
Solid modelling represents a closed three-dimensional volume rather than only its visible surface.
Solid modelling represents a closed three-dimensional volume rather than only its visible surface. [14]
Category:
Source
A source is the person, record, publication, dataset, or system from which information comes.
A source is the person, record, publication, dataset, or system from which information comes. [6]
Category:
Spacer
Spade lug
SPDT
Single-pole double-throw switch or relay contacts.
Single-pole double-throw switch or relay contacts. [1, p. 1218]
Category:
Specific gravity
Ratio of weight of a substance with that of an equal volume of water.
Ratio of weight of a substance with that of an equal volume of water. [1, p. 1218]
Category:
Specific resistance
The R for a unit length, area, or volume.
The R for a unit length, area, or volume. [1, p. 1218]
Category:
Specification
Speed
Speed is the rate of change of distance with time.
Speed is a scalar: it has magnitude but no direction. It is the rate of change of distance with time. In calculus, speed is the derivative of distance travelled with respect to time. Common units include metres per second (m/s), kilometres per hour (km/h), and miles per hour (mph).
Category:
SPST
Single-pole single-throw switch or relay contacts.
Single-pole single-throw switch or relay contacts. [1, p. 1218]
Category:
Square wave
An almost instantaneous rise and decay of voltage or current in a periodic pattern with time and with a constant peak value.
An almost instantaneous rise and decay of voltage or current in a periodic pattern with time and with a constant peak value. The V or I is on and offfor equal times and at constant values. [1, p. 1218]
Category:
Standard resistor
A variable resistor in one leg of a Wheatstone bridge that is varied to provide equal voltage ratios in both series strings of the bridge.
A variable resistor in one leg of a Wheatstone bridge that is varied to provide equal voltage ratios in both series strings of the bridge. With equal voltage ratios in each series string the bridge is said to be balanced. [1, p. 1218]
Category:
State Machine
Also called: Finite State Machine, FSM
A state machine models behaviour as named states and event-driven transitions between them.
A state machine models behaviour as named states and event-driven transitions between them.
Category:
References
Static electricity
Stator
Stationary part of a generator or motor.
Stationary part of a generator or motor. [1, p. 1218]
Category:
Steady-state value
The V or I produced by a source without any sudden changes.
The V or I produced by a source without any sudden changes. Can be DC or AC value. Final value of V or I after transient state. [1, p. 1218]
Category:
STEP file
STL
Also called: Stereolithography file
STL is a file format that represents a model's surface as a set of triangles.
STL is a file format that represents a model's surface as a set of triangles. [14]
Category:
Storage cell or battery
Strain Relief
Strain relief transfers pulling and bending forces away from an electrical termination.
Strain relief transfers pulling and bending forces away from an electrical termination.
Category:
References
Stray capacitance
A very small capacitance that exists between any two conductors separated by an insulator.
A very small capacitance that exists between any two conductors separated by an insulator. The capacitance can be between two wires in a wiring harness or between a single wire and a metal chassis as examples. [1, p. 1218]
Category:
Stray inductance
The small inductance associated with any length of conductor or component lead.
The small inductance associated with any length of conductor or component lead. The effects of both stray inductance and stray capacitance are most noticeable with very high frequencies. [1, p. 1218]
Category:
String
Strings in parallel
Series resistor strings that are connected in parallel with each other.
Series resistor strings that are connected in parallel with each other. [1, p. 1218]
Category:
Stroke
Stroke is the painted outline of a vector path or shape.
Stroke is the painted outline of a vector path or shape. [8, Ch. 13]
Category:
Structured Output
Structured output follows a defined machine-readable shape such as a table, record, or schema-constrained object.
Structured output follows a defined machine-readable shape such as a table, record, or schema-constrained object.
Category:
References
Summing amplifier
An amplifier whose output voltage equals the negative sum of the input voltages.
An amplifier whose output voltage equals the negative sum of the input voltages. [1, p. 1218]
Category:
Superconductivity
Very low R at extremely low temperatures.
Very low R at extremely low temperatures. [1, p. 1218]
Category:
Superposition theorem
Method of analyzing a network with multiple sources by using one at a time and combining their effects.
Method of analyzing a network with multiple sources by using one at a time and combining their effects. [1, p. 1218]
Category:
Supersonic
Frequency above the range of hearing, generally above 16,000 Hz.
Frequency above the range of hearing, generally above 16,000 Hz. [1, p. 1218]
Category:
Support material
Also called: Print support, Supports
Support material is temporary printed structure that holds up geometry that cannot print reliably on its own.
Support material is temporary printed structure that holds up geometry that cannot print reliably on its own. [20]
Category:
Surface-mount resistor
Resistor made by depositing a thick carbon film on a ceramic base.
Resistor made by depositing a thick carbon film on a ceramic base. Electrical connection to the resistive element is made by two leadless solder, end electrodes that are C-shaped. [1, p. 1218]
Category:
Surface-mount technology
Components soldered directly to the copper traces of a printed circuit board.
Components soldered directly to the copper traces of a printed circuit board. No holes need to be drilled for surface-mounted components. [1, p. 1218]
Category:
Susceptance
Reciprocal of reactance in sine-wave AC circuits
Reciprocal of reactance in sine-wave AC circuits [1, p. 1218]
Category:
Swamping resistor
An unbypassed resistor in the emitter circuit of a common-emitter amplifier.
An unbypassed resistor in the emitter circuit of a common-emitter amplifier. A swamping resistor stabilizes the voltage gain and reduces distortion. [1, p. 1218]
Category:
Switch
Device used to open or close connections of a voltage source to a load circuit.
Device used to open or close connections of a voltage source to a load circuit. [1, p. 1218]
Category:
Switching contacts
The contacts that open and close when a relay is energized.
The contacts that open and close when a relay is energized. [1, p. 1218]
Category:
Symmetrical JFET
System Service
Also called: Service
A system service is a managed background program that provides an operating-system or network function.
A system service is a managed background program that provides an operating-system or network function.
Category:
References
T47 terms
Tab
Tail current
Also called: I T
The DC current in the emitter resistor of a differential amplifier.
The DC current in the emitter resistor of a differential amplifier. [1, p. 1218]
Category:
Tangent
Also called: tan
Trigonometric function of an angle, equal to the ratio of the opposite side to the adjacent side in a right triangle.
Trigonometric function of an angle, equal to the ratio of the opposite side to the adjacent side in a right triangle. [1, p. 1218]
Category:
Tank circuit
Tantalum
Chemical element used for electrolytic capacitors.
Chemical element used for electrolytic capacitors. [1, p. 1218]
Category:
Taper
How R of a variable resistor changes with the angle of shaft rotation.
How R of a variable resistor changes with the angle of shaft rotation. [1, p. 1218]
Category:
Tapered control
The manner in which the resistance of a potentiometer varies with shaft rotation.
The manner in which the resistance of a potentiometer varies with shaft rotation. For a linear taper, one-half shaft rotation corresponds to a resistance change of one-half its maximum value. For a nonlinear taper, the resistance change is more gradual at one end, with larger changes at the other end. [1, p. 1218]
Category:
Taut-band meter
Type of construction for meter movement often used in VOM.
Type of construction for meter movement often used in VOM. [1, p. 1218]
Category:
Temperature coefficient
For resistance, how R varies with a change in temperature.
For resistance, how R varies with a change in temperature. [1, p. 1218]
Category:
Template
A template is a reusable guide for locating, shaping, or checking features.
A template is a reusable guide for locating, shaping, or checking features. [23]
Category:
Tesla
Unit of flux density, equal to 108 lines of force per square meter.
Unit of flux density, equal to 108 lines of force per square meter. [1, p. 1218]
Category:
Test coupon
Test Dataset
Also called: Test Set
A test dataset is held back from model selection and used for a final estimate of performance on unseen examples.
A test dataset is held back from model selection and used for a final estimate of performance on unseen examples.
Category:
References
Test print
Thermistor
A resistor whose resistance value changes with changes in its operating temperatures.
A resistor whose resistance value changes with changes in its operating temperatures. [1, p. 1218]
Category:
Thevenin Equivalent
A Thevenin equivalent represents a linear two-terminal network as an ideal voltage source in series with a resistance.
A Thevenin equivalent represents a linear two-terminal network as an ideal voltage source in series with a resistance.
Category:
References
Thevenin’s theorem
Method of reducing a complicated network to one voltage source with series resistance.
Method of reducing a complicated network to one voltage source with series resistance. [1, p. 1218]
Category:
Three-phase power
AC voltage generated with three components differing in phase by 120°.
AC voltage generated with three components differing in phase by 120°. [1, p. 1218]
Category:
Threshold voltage
Also called: th
The minimum value of VGS in an enhancement-type MOSFET which causes drain current to flow.
The minimum value of VGS in an enhancement-type MOSFET which causes drain current to flow. [1, p. 1219]
Category:
Throw
The number of closed contact positions that exist per pole on a switch.
The number of closed contact positions that exist per pole on a switch. [1, p. 1219]
Category:
Thyristor
A semiconductor device with alternating layers of p and n material that can only be operated in the switching mode where they act as either an open or closed switch.
A semiconductor device with alternating layers of p and n material that can only be operated in the switching mode where they act as either an open or closed switch. [1, p. 1219]
Category:
Time Constant
A time constant characterizes how quickly a first-order circuit rises or falls after a change.
A time constant characterizes how quickly a first-order circuit rises or falls after a change.
Category:
References
Timeline
tmux
tmux is a terminal multiplexer that manages persistent terminal sessions containing multiple windows and panes.
tmux is a terminal multiplexer that manages persistent terminal sessions containing multiple windows and panes.
Category:
References
Token
A token is one discrete unit of text representation processed by a language model.
A token is one discrete unit of text representation processed by a language model.
Category:
References
Tokenization
Tokenization converts text into a sequence of tokens according to a defined vocabulary and procedure.
Tokenization converts text into a sequence of tokens according to a defined vocabulary and procedure.
Category:
References
Tolerance
Top view
A top view is an orthographic view looking directly down at an object.
A top view is an orthographic view looking directly down at an object. [14]
Category:
Toroid
Electromagnet with its core in the form of a closed magnetic ring.
Electromagnet with its core in the form of a closed magnetic ring. [1, p. 1219]
Category:
Traceroute
Traceroute estimates the sequence of network hops toward a destination by eliciting time-exceeded responses.
Traceroute estimates the sequence of network hops toward a destination by eliciting time-exceeded responses.
Category:
References
Trade-off
Training Dataset
Also called: Training Set
A training dataset contains examples used to adjust a model's parameters.
A training dataset contains examples used to adjust a model's parameters.
Category:
References
Transconductance
Also called: gm
The ratio of the change in drain current, ΔID, to the change in gate- source voltage, ΔVGS for a fixed value of VDS.
The ratio of the change in drain current, ΔID, to the change in gate- source voltage, ΔVGS for a fixed value of VDS. The unit of gm is the siemens (S). [1, p. 1219]
Category:
Transformer Model
Also called: Transformer
A Transformer is a neural-network architecture built around attention and position-aware token representations.
A Transformer is a neural-network architecture built around attention and position-aware token representations.
Category:
References
Transient response
Temporary value of V or I in capacitive or inductive circuits caused by abrupt change.
Temporary value of V or I in capacitive or inductive circuits caused by abrupt change. [1, p. 1219]
Category:
Transistor
A three-terminal semiconductor device that can amplify an AC signal or be used as an electronic switch.
A three-terminal semiconductor device that can amplify an AC signal or be used as an electronic switch. [1, p. 1219]
Category:
Transistor Switch
A transistor switch uses a smaller control signal to place a transistor in off or conducting operation for a load.
A transistor switch uses a smaller control signal to place a transistor in off or conducting operation for a load.
Category:
References
Transparency
Also called: Alpha transparency
Transparency allows image content to be partly or fully see-through.
Transparency allows image content to be partly or fully see-through. [9]
Category:
Triac
A bidirectional semiconductor device that remains in a nonconducting state until the forward breakover voltage is reached.
A bidirectional semiconductor device that remains in a nonconducting state until the forward breakover voltage is reached. Once conducting, the voltage across the triac drops to a very low value. Like an SCR, the breakover voltage can be controlled by gate current. [1, p. 1219]
Category:
Trigonometry
Trivalent atom
Troubleshooting
A term that refers to the diagnosing or analyzing of a faulty electronic circuit.
A term that refers to the diagnosing or analyzing of a faulty electronic circuit. [1, p. 1219]
Category:
Truth Table
A truth table lists every input combination in binary order and records each output in its own column.
A truth table lists every input combination in binary order and records each output in its own column.
Category:
References
Tuning
Varying the resonant frequency of an LC circuit.
Varying the resonant frequency of an LC circuit. [1, p. 1219]
Category:
Turns ratio
Comparison of turns in primary and secondary of a transformer.
Comparison of turns in primary and secondary of a transformer. [1, p. 1219]
Category:
Twin lead
Transmission line with two conductors in plastic insulator.
Transmission line with two conductors in plastic insulator. [1, p. 1219]
Category:
Typography
Typography is the selection and arrangement of type to communicate written information.
Typography is the selection and arrangement of type to communicate written information. [25]
Category:
U10 terms
UHF
Ultra high frequencies in band of 30 to 300 MHz.
Ultra high frequencies in band of 30 to 300 MHz. [1, p. 1219]
Category:
Unified Extensible Firmware Interface
Also called: UEFI
UEFI is a modern firmware interface that initializes hardware and provides services for starting an operating system.
UEFI is a modern firmware interface that initializes hardware and provides services for starting an operating system.
Category:
References
Uniform Resource Locator
Also called: URL, Web address
A URL is an address that identifies where a resource can be found and how it can be accessed.
A URL is an address that identifies where a resource can be found and how it can be accessed. [12]
Category:
Unijunction transistor
Also called: UJT
A 3-terminal semiconductor device that has only 1 p-n junction.
A 3-terminal semiconductor device that has only 1 p-n junction. UJTs are used to control the conduction angle of an SCR. [1, p. 1219]
Category:
Unipolar
A device having only one type of charge carrier, either electrons or holes.
A device having only one type of charge carrier, either electrons or holes. [1, p. 1219]
Category:
Universal time constant graph
A graph that shows the percent change in voltage or current in an RC or RL circuit with respect to the number of time constants that have elapsed.
A graph that shows the percent change in voltage or current in an RC or RL circuit with respect to the number of time constants that have elapsed. [1, p. 1219]
Category:
Unsupervised Learning
Unsupervised learning seeks patterns or representations in data without target labels for each example.
Unsupervised learning seeks patterns or representations in data without target labels for each example.
Category:
References
User experience
User flow
A user flow is the sequence of steps a user follows to complete a task.
A user flow is the sequence of steps a user follows to complete a task. [25]
Category:
User interface
Also called: UI
A user interface is the controls and information through which a person interacts with a system.
A user interface is the controls and information through which a person interacts with a system. [25]
Category:
V29 terms
Valence electrons
Electrons in the outermost ring or shell of an atom.
Electrons in the outermost ring or shell of an atom. [1, p. 1219]
Category:
Validation Dataset
Variable
A variable is a named reference used by a program to access a value that may change.
A variable is a named reference used by a program to access a value that may change.
Category:
References
Variac
Transformer with variable turns ratio to provide different amounts of secondary voltage.
Transformer with variable turns ratio to provide different amounts of secondary voltage. [1, p. 1219]
Category:
Vector
A vector is a quantity with both magnitude and direction.
A vector is a quantity with both magnitude and direction. Displacement, velocity, and acceleration are vector quantities.
Category:
Vector cut
Vector graphic
Vector path
Also called: Path
A vector path is a geometric outline made from line or curve segments.
A vector path is a geometric outline made from line or curve segments. [8, Ch. 9]
Category:
Velocity
Velocity is the rate of change of displacement with time and is a vector.
Velocity is the rate of change of displacement with time. It is a vector, so it has both magnitude and direction. The SI unit is metres per second (m/s); common everyday units can also include kilometres per hour (km/h) or miles per hour (mph) when a direction is included. For example, 100 km/h north while driving northbound on Highway 410 describes a velocity, while 100 km/h by itself describes only speed.
Category:
Verification
Vertex
Also called: Mesh vertex
A vertex is a point that defines a corner or location in a polygon mesh.
A vertex is a point that defines a corner or location in a polygon mesh. [16]
Category:
VHF
Very high frequencies in band of 30 to 300 MHz.
Very high frequencies in band of 30 to 300 MHz. [1, p. 1219]
Category:
Visual hierarchy
Volt
Also called: V, volts
The volt (V) is the SI unit of electric potential difference.
The volt, symbol V, is the SI unit used to measure electric potential difference, commonly called voltage. One volt is one joule of energy per coulomb of electric charge.
Category:
Volt-ampere
Also called: VA
Unit of apparent power, equal to V × I.
Unit of apparent power, equal to V × I. [1, p. 1219]
Category:
Volt-ampere characteristic
Volt-ampere reactive
Also called: VAR
The volt-amperes at the angle of 90°.
The volt-amperes at the angle of 90°. [1, p. 1219]
Category:
Voltage
Also called: Potential Difference
Voltage is electric potential difference: energy transferred per unit charge.
Voltage is the electric potential difference between two points. It describes energy transferred per unit charge. The SI unit is the volt (V). In introductory circuit work, voltage is sometimes described as electrical push, but potential difference is the more precise idea.
Category:
Voltage Divider
Voltage drop
Voltage across each component in a series circuit.
Voltage across each component in a series circuit. The proportional part of total applied V. [1, p. 1219]
Category:
Voltage follower
An op-amp circuit with unity voltage gain.
An op-amp circuit with unity voltage gain. A voltage follower has a very high input impedance and a very low output impedance. Voltage followers are also known as unity-gain amplifiers, buffer amplifiers, and isolation amplifiers. [1, p. 1219]
Category:
Voltage gain
Also called: A V
The ratio of output voltage to input voltage in a transistor amplifier or Vin
The ratio of output voltage to input voltage in a transistor amplifier or Vin [1, p. 1219]
Category:
Voltage polarity
The positive and negative ends of a potential difference across a component such as a resistor.
The positive and negative ends of a potential difference across a component such as a resistor. [1, p. 1219]
Category:
Voltage Regulator
A voltage regulator maintains an output voltage within limits as input or load conditions change.
Category:
References
Voltage source
Supplies potential difference across two terminals.
Supplies potential difference across two terminals. Has internal series ri. [1, p. 1219]
Category:
Voltage taps
The points in a series voltage divider that provide different voltages with respect to ground.
The points in a series voltage divider that provide different voltages with respect to ground. [1, p. 1219]
Category:
Voltaic cell
A device that converts chemical energy into electric energy.
A device that converts chemical energy into electric energy. The output voltage of a voltaic cell depends on the type of elements used for the electrodes. [1, p. 1219]
Category:
Voltmeter loading
The amount of current taken by the voltmeter acting as a load.
The amount of current taken by the voltmeter acting as a load. As a result, the measured voltage is less than the actual value. [1, p. 1219]
Category:
VOM
W16 terms
Washer
Watt
Watt-hour
Unit of electric energy, as power × time.
Unit of electric energy, as power × time. [1, p. 1219]
Category:
Wattmeter
Measures real power as instantaneous value of V × I.
Measures real power as instantaneous value of V × I. [1, p. 1219]
Category:
Wavelength
Distance in space between two points with the same magnitude and direction in a propagated wave.
Distance in space between two points with the same magnitude and direction in a propagated wave. [1, p. 1219]
Category:
Wavetrap
An LC circuit tuned to reject the resonant frequency.
An LC circuit tuned to reject the resonant frequency. [1, p. 1219]
Category:
Web browser
Also called: Browser
A web browser retrieves and presents web resources and provides controls for navigating them.
A web browser retrieves and presents web resources and provides controls for navigating them. [11]
Category:
Web server
Weber
Also called: Wb
Unit of magnetic flux, equal to 108 lines of force.
Unit of magnetic flux, equal to 108 lines of force. [1, p. 1219]
Category:
Webpage
Also called: Web page
A webpage is a document or application presented by a web browser at a URL.
A webpage is a document or application presented by a web browser at a URL. [11]
Category:
Website
A website is a related collection of webpages and resources published under a common identity or location.
A website is a related collection of webpages and resources published under a common identity or location. [11]
Category:
Wheatstone bridge
Balanced circuit used for precise measurements of resistance.
Balanced circuit used for precise measurements of resistance. [1, p. 1219]
Category:
Wire gage
A system of wire sizes based on the diameter of the wire.
A system of wire sizes based on the diameter of the wire. Also, the tool used to measure wire size. [1, p. 1219]
Category:
Wire-wound resistors
Resistors made with wire known as resistance wire that is wrapped around an insulating core.
Resistors made with wire known as resistance wire that is wrapped around an insulating core. [1, p. 1219]
Category:
Work
Corresponds to energy.
Corresponds to energy. Equal to power × time, as in kilowatt-hour unit. Basic unit is one joule, equal to one volt-coulomb, or one watt-second. [1, p. 1219]
Category:
Wye network
Three components connected with one end in a common connection and the other ends to three lines.
Three components connected with one end in a common connection and the other ends to three lines. Same as T network. [1, p. 1219]
Category:
X3 terms
XL
XNOR Gate
An XNOR gate outputs 1 when its compared inputs have the same logic value.
An XNOR gate outputs 1 when its compared inputs have the same logic value.
Category:
References
XOR Gate
An XOR gate outputs 1 when its compared inputs have different logic values.
An XOR gate outputs 1 when its compared inputs have different logic values.
Category:
References
Y1 terms
Y network
Another way of denoting a wye network.
Another way of denoting a wye network. [1, p. 1219]
Category:
Z6 terms
Zener current
Also called: IZ
The name given to the reverse current in a zener diode.
The name given to the reverse current in a zener diode. [1, p. 1219]
Category:
Zener diode
A diode that has been optimized for operation in the breakdown region.
A diode that has been optimized for operation in the breakdown region. [1, p. 1219]
Category:
Zero-crossing detector
An op-amp comparator whose output voltage switches to either 6Vsat when the input voltage crosses through zero.
An op-amp comparator whose output voltage switches to either 6Vsat when the input voltage crosses through zero. [1, p. 1219]
Category:
Zero-ohm resistor
A resistor whose value is practically 0 Ω.
A resistor whose value is practically 0 Ω. The 0-Ω value is denoted by a single black band around the center of the resistor body. [1, p. 1219]
Category:
Zero-ohms adjustment
Used with ohmmeter of a VOM to set the correct reading at zero ohms.
Used with ohmmeter of a VOM to set the correct reading at zero ohms. [1, p. 1219]
Category:
Zero-power resistance
The resistance of a thermistor with zero power dissipation, designated R0.
The resistance of a thermistor with zero power dissipation, designated R0. [1, p. 1219]
Category: