Technological Education Resources Technological Education Resources Tech Edu
  • Educator Resources
    • General Slides
    • General Materials
    • General Design & Fabrication
    • Computer Engineering Notes
  • Classes
    • TAS Slides
    • TEJ Slides
    • TTJ / TTS Slides
  • Glossary
  • Lore
  • About
  1. Electronics Lesson Library
  • TEJ3/4 Computer Engineering Home
  • Curriculum Roadmap
  • Engineering Preparation Track
  • Electronics Lesson Library
  • 4. Project Portfolio
    • 1. Build a Technical Portfolio
  • 5. Circuits and Electronics
    • 1. Component Foundations: Circuits and Schematics
    • 2. Component Foundations: Resistors
    • 3. Capacitors 1: Capacitors from Zero
    • 4. Capacitors 2: RC Charging and Discharging
    • 5. Capacitors 3: RC Time Constants and Design
    • 6. Component Foundations: Diodes and LEDs
    • 7. Component Foundations: Transistors
    • 8. Component Foundations: Operational Amplifiers
    • 9. Package 1: Basic Electricity and Parallel Circuits
    • 10. Package 2: Parallel Review and Series Circuits
    • 11. Series-Parallel Combination Circuits, Part A
    • 12. Kirchhoff’s Laws
    • 13. Linear Algebra for Circuits
    • 14. Build and Measure Circuits in Tinkercad
  • 6. Computer Systems
    • 1. Open a Computer Safely and Identify the Parts
    • 2. USB, Peripherals, and Cable Management
  • 7. Linux and Operating Systems
    • 1. Choosing a Linux Distribution
    • 2. Install Linux Mint
    • 3. Explore Linux
    • 4. Know Your Linux Computer
    • 5. Files, Terminal, and Permissions
    • 6. Git Version Control
    • 7. Build a Quarto Website
    • 8. Publish with GitHub Pages
    • 9. Python Measurement Logging
    • 10. Python Analysis and Curve Fitting
    • 11. Networking, SSH, and tmux
    • 12. Power and Raspberry Pi Bridge
  • 8. Networking
    • 1. How Wi-Fi and Ethernet Connect
    • 2. Ethernet Cable Categories and Speeds
    • 3. Build and Test an Ethernet Cable
  • 9. Computational Engineering
    • 1. Python Engineering Notebooks with JupyterLite
    • 2. Circuit Quest: Power the Grid
    • 3. Assignment: Python First Steps
    • 4. Run Python and Jupyter on Your Own Computer
    • 5. Assignment: Python and NumPy Foundations
    • 6. Find Documentation and Ask for Programming Help
    • 7. Assignment: From Two Loops to a Matrix
    • 8. Jupyter Electronics Lab
    • 9. Life Checkpoint Upgrade: Jupyter + Tinkercad

TEJ Electronics Library

A focused table of contents for coordinated notes, slides, problem sets, references, and restricted teacher answers.

Each package coordinates concise notes, a teaching deck, five student questions, formula and calculator references, and an experiment or explicit no-lab decision. Restricted answer keys are identified without exposing their files. Use the circuit foundations reference for significant figures, notation, core equations, and the GUESS method.

Shared student resources

  • TEJ Electronics Quick Reference
  • Standard 5% Resistor Values, page 2
  • Make a copy of the General Schematic and GUESS Handout
  • Student circuits lesson folder

The catalogue below links only the current student lessons. Files marked LEGACY, teacher answer keys, the staging deck, and the development style guide are not part of the student sequence.

Search and filter lessons

Showing 14 lessons.

5. Circuits and Electronics14 lessons
1. Component Foundations: Circuits and Schematics▾

Start from zero with circuit roles, schematic symbols, wires, nodes, junctions, ground, and one complete current path.

Students need a shared visual language before calculations, simulation, breadboarding, or troubleshooting.

2. Component Foundations: Resistors▾

Distinguish resistance from a resistor and use value, tolerance, power, Ohm's law, and current limiting.

Resistors appear in nearly every later circuit and protect components such as LEDs and transistor inputs.

3. Capacitors 1: Capacitors from Zero▾

Learn capacitor structure, symbols, units, polarity, voltage rating, stored charge, and energy.

The first package establishes the component before time-dependent circuit analysis.

Slides Five-Question Sheet Jupyter Notebook Teacher Answers, restricted

4. Capacitors 2: RC Charging and Discharging▾

Predict starting conditions, steady state, charging curves, and discharging curves.

Students connect a clean schematic to a graph, Jupyter model, and Tinkercad circuit.

Slides Five-Question Sheet Jupyter Notebook Tinkercad Classroom Teacher Answers, restricted

5. Capacitors 3: RC Time Constants and Design▾

Calculate a time constant, solve for a part value, select a standard part, and verify the actual result.

The design package connects RC circuits to simulation, engineering tolerances, op amps, and an optional calculus bridge.

Slides Five-Question Sheet Jupyter Notebook Tinkercad Classroom Teacher Answers, restricted

6. Component Foundations: Diodes and LEDs▾

Learn diode direction, polarity, forward voltage, reverse blocking, LED current limiting, and diode-mode testing.

Diodes provide protection, indication, rectification, and two orientation-sensitive parts in the XL741 kit.

7. Component Foundations: Transistors▾

Introduce NPN and PNP transistor terminals, switching, ratings, pinout verification, and controlled load current.

Transistor knowledge turns the XL741 from a mysterious board into a visible network of functional stages.

8. Component Foundations: Operational Amplifiers▾

Explain differential inputs, supply rails, negative feedback, voltage followers, real limits, and the optional XL741.

Op-amps connect component behaviour to sensing, control, signals, feedback, and an optional bridge to calculus.

9. Package 1: Basic Electricity and Parallel Circuits▾

Connect basic electrical quantities, components, measurement, computer loads, and parallel-circuit calculations.

Parallel paths explain why loads in computers, vehicles, and buildings operate independently.

Package 1 Slides Parallel-Circuit Handout Photo Submission Student Models: Questions 1 and 2 Grob Chapter 5 Problems Manual Experiment 5-1 Experiment 5-2 Experiment 5-3 Quick Reference Schematic + GUESS Teacher Answers, restricted

10. Package 2: Parallel Review and Series Circuits▾

Review one parallel calculation, then calculate current, voltage drops, resistance, and power in one-path circuits.

Series rules appear in indicator lights, sensor chains, voltage drops, and component strings.

Package 2 Slides Six-Question Problem Set Worked Q2 + Q4 Grob Chapter 4 Grob Chapter 5 Review Problems Manual Experiment 4-1 Experiment 4-2 Quick Reference 5% Resistor Values Schematic + GUESS Teacher Answers, restricted

11. Series-Parallel Combination Circuits, Part A▾

Assignment 1.4: reduce mixed networks in stages and verify currents and voltages.

Real systems often combine shared paths with parallel loads.

Day 22 Slides Complete Teaching Deck Digital GUESS Assignment Printable or Handwritten Assignment Quick Reference 5% Resistor Values Schematic + GUESS Teacher Answers, restricted

12. Kirchhoff's Laws▾

Write current and voltage equations for circuits that cannot be reduced directly.

Kirchhoff analysis supports troubleshooting and more advanced network methods.

Slides Current Problem Set Quick Reference Schematic + GUESS Teacher Answers, restricted

13. Linear Algebra for Circuits▾

Solve simultaneous circuit equations by substitution, elimination, and matrices.

The method prepares students for college and university network analysis.

Slides Current Problem Set Quick Reference Teacher Answers, restricted

14. Build and Measure Circuits in Tinkercad▾

Build a low-voltage circuit, run the simulation, measure it, and compare the evidence with a calculation.

Simulation provides a safe, repeatable bridge between schematic analysis and physical measurement.

Tinkercad Circuits

No lessons match these filters.

Teachers can use the electronics lesson-package standard when building or reviewing a package.

Website code: AGPL 3.0. Educational content: CC BY-SA 4.0.

Educational content may be shared, copied, modified, and redistributed. Keep the CC BY-SA 4.0 licence and credit Andrew Andrade, andrewandrade.ca, and github.com/mrandrewandrade. Add your own name and links when adapting it. Sharing is caring.

The website code uses the AGPL 3.0, a copyleft licence: if you share modified code or run a modified version as a network service, you must make the corresponding source code available under the same licence.

 
  • References

  • Licensing