Circuits
Learning goals
By the end of this unit:
- I will be able to write values with suitable precision, notation, prefixes, and units.
- I will be able to use Ohm’s law, power equations, and series, parallel, and mixed-circuit rules.
- I will be able to organize a solution with the GUESS method and check whether it is reasonable.
This is important because it enables me to predict a circuit before I build it and to explain my work clearly.
Higher voltage is shown at the top and the 0 V or ground return at the bottom. On a vertical battery symbol, the long line is positive and belongs above the short negative line. Conventional current arrows run from the positive rail through the load toward ground. Ground is the circuit’s chosen 0 V reference.
Significant figures
Significant figures show the precision of a measured or stated value. Keep full calculator precision and round once, at the end.
0.00420 has three significant figures.
\(6.23 \times 1.23 = 7.6629\), reported as 7.66.
For multiplication and division, use the same number of significant figures as the least precise input. For addition and subtraction, use the least precise decimal place.
Notation and Metric Prefixes
Scientific notation: \(a \times 10^n\), where \(1 \le a < 10\). Engineering notation: \(a \times 10^n\), where \(1 \le a < 1000\) and \(n\) is a multiple of three.
\(27\,000 = 2.7 \times 10^4 = 27 \times 10^3 = 27\,\mathrm{k}\) \(0.00047 = 4.7 \times 10^{-4} = 470 \times 10^{-6} = 470\,\mu\)
| Prefix | Symbol | Power |
|---|---|---|
| mega | M | \(10^6\) |
| kilo | k | \(10^3\) |
| base unit | \(10^0\) | |
| milli | m | \(10^{-3}\) |
| micro | \(\mu\) | \(10^{-6}\) |
| nano | n | \(10^{-9}\) |
Ohm’s law and power
Ohm’s law connects voltage, current, and resistance.
\[ V = IR \qquad I = \frac{V}{R} \qquad R = \frac{V}{I} \tag{1}\]
Equation Equation 1 gives the three general forms of Ohm’s law.
Electrical power is the rate of energy transfer:
\[ P = VI \qquad P = I^2R \qquad P = \frac{V^2}{R} \tag{2}\]
Use Equation Equation 2 only after identifying the known quantities.
Use volts (V), amperes (A), ohms (\(\Omega\)), and watts (W). Convert prefixes before substituting, then report the final answer with the appropriate prefix and significant figures.
GUESS method
Put each part on its own line.
G: Given: list each known value with its symbol and unit.
U: Unknown: list each value you must find.
E: Equation: choose a general equation.
S: Substitute: rearrange first, then substitute values with units.
S: Solve: show the unrounded result, check it, then round once.
For a Casio calculator, enter one calculation per line. Use EXP for powers of ten. Write units beside the result, not in the calculator.
Circuit-analysis chapters
Use these notes with the matching teaching slides and question sheet.
- Parallel circuits: common voltage, branch currents, equivalent resistance, and power.
- Series circuits: one current path, voltage drops, resistance, and power.
- Series-parallel circuits: identify groups, reduce, solve, expand, and check.
- Kirchhoff’s laws: write current and voltage equations for networks that do not reduce directly.
- Linear algebra for circuits: solve several node or loop equations together.
- LED to capacitor build sequence: earn the Tinkercad readiness check, correct the simulation, then build and measure the approved physical circuit.
Practical pathway
Keep the normal teaching slides, Grob reading, question set, and worked examples. Add one short practical activity only when it supports the current concept:
- Understand and calculate using the existing lesson and assignment.
- Build and simulate with Build and Measure Circuits in Tinkercad. The matching simulation must earn 100% before physical parts are issued.
- Correct and approve on the next scheduled lab day. Then measure and verify with the LED-to-capacitor build sequence and hands-on circuit stations.
- Investigate with Python using the computational engineering notebooks when repeated calculations, graphs, or systems add value.
- Document and share a concise conclusion or technical portfolio entry.
The simulation and notebook are supporting activities, not another full five-question electronics package. Most guided activities are designed for 15–30 minutes after the normal calculation work.
Class materials
Open the student circuits lesson folder. The links below identify the current student files. Files labelled LEGACY, teacher answer keys, the staging deck, and the lesson-package SOP are not part of the student lesson sequence.
Core references
Package 1: Basic electricity to computer loads
Package 2: Parallel review and series circuits
Series Circuits A
Assignment 1.4: Series-Parallel Combination Circuits, Part A
Kirchhoff’s laws
Simultaneous equations and matrices
- Notes
- Teaching slides
- Make a copy of the current student problem set
- Grob Chapter 9: Kirchhoff’s Laws for the circuit equations
- Grob Problems Manual for Chapter 9 practice
Worked solutions for selected questions are included on the relevant notes pages. Teachers can email Andrew for complete answer keys; answer-key files are not linked publicly.
Textbook support
These topics follow Grob’s Basic Electronics, Chapters 1, 3, 4, 5, 6, and 9. [1]