Open a Computer Safely and Identify the Parts
Power off. Unplug. Control static. Then look inside.
POWER OFF
UNPLUG
HOLD POWER 10 s
CONTROL STATIC
HANDLE EDGES
NEVER OPEN THE PSU
Shut down, unplug wall power and peripherals, then hold the power button for about 10 seconds. Work on a clean, dry, non-carpeted surface. Use the approved antistatic procedure. Never open the metal power-supply enclosure.
Figure 1. The whole system first. Open image source and licence.
What is inside?
Motherboard
The main circuit board. It connects the CPU, RAM, storage, power, ports, and expansion cards.
CPU
Runs program instructions. A heat sink and fan usually cover it.
RAM
Fast working memory for programs in use now. It clears when power is removed.
Power supply
Converts wall AC to the low-voltage DC used by the computer. Inspect only the outside, cables, and label.
Cooling
Fans, heat sinks, vents, and thermal material move heat away from chips.
Expansion parts
Graphics, Wi-Fi, network, and sound cards add functions. Not every computer has every part.
SSD or spinning hard disk?

HDD: spinning disk
Magnetic platters spin under a moving read/write head. Usually cheaper per terabyte, but slower, noisier, and easier to damage while spinning.
Figure 2. HDD and SSD. Open source and licence.
SSD: flash storage
Stores data in electronic flash memory. No moving parts. Usually faster, silent, lower-power, and more resistant to bumps.
Figure 3. M.2 SSD. Open source and licence.
How storage connects

SATA drive: two connections
SATA data is the narrow 7-pin path to the motherboard. SATA power is the wider 15-pin path to the power supply.
Figure 4. SATA connectors. Open source and licence.
M.2 drive: mounts on the board
M.2 describes the shape. The drive may use SATA or NVMe/PCIe. The drive and motherboard slot must support the same type.
Try it
With the computer unplugged, point to each visible part. Say its name and job before touching it. Use the teacher’s motherboard photograph for the model-specific close-up.
Use only directly matching pages: processor SoC, pp. 86 to 87; SATA cable, p. 163; hard-drive heads, pp. 220 to 223; printed circuit boards, pp. 232 to 235; MicroSD flash as a comparison, pp. 238 to 239; logic board, pp. 244 to 247; DC-DC converter, p. 249. Do not publish book scans without permission.