Know Your Linux Computer
Learning goals
- I will be able to identify the main hardware in my assigned computer.
- I will be able to find the same information with graphical tools and terminal commands.
- I will be able to explain the difference between installed hardware and current resource use.
This is important because it enables me to describe a computer accurately, decide whether software will run well, and notice when a system is under unusual load.
Start with the GUI
Open System Info from the Linux Mint menu. Record the operating system, Xfce version, processor, installed memory, graphics device, and storage information. Then open Task Manager and observe CPU and memory use while no large application is open.
Open a browser and Software Manager. Watch what changes. A computer can have 8 GB of RAM installed without having all 8 GB available because Linux and open applications are using some of it.
Confirm it in the terminal
Run one command at a time. Read the output before continuing.
If you have not completed the cross-platform terminal basics, make a copy of Terminal Quest: WSL and Mac Basics. It explains how to open WSL, Linux Terminal, or macOS Terminal, run beginner commands, inspect processes, and paste a reviewed command history into one Google Doc.
lscpu
free -h
lsblk
df -h
lspci
ip addressExample free -h output:
total used free available
Mem: 7.7Gi 2.1Gi 3.8Gi 5.3Gi
Swap: 2.0Gi 0B 2.0Gi
Example lsblk output:
NAME SIZE TYPE MOUNTPOINTS
sda 238.5G disk
├─sda1 512M part /boot/efi
└─sda2 238G part /
Your device names and values will differ. Focus on what each column means rather than copying the example.
Use lscpu for processor information, free -h for memory, lsblk for storage devices, df -h for used and available space, lspci for internal hardware, and ip address for network interfaces.
Install htop from Software Manager if it is not already available, then run:
htopObserve the processor meters, memory meter, process list, and load average. Press q to quit. Do not end a process unless your teacher approves it.
Submit
This is follow-up lesson evidence, not part of the three Explore Linux assignment submissions. If your teacher assigns it separately, include a two-column hardware inventory, one System Info screenshot, one htop or top screenshot, and a short comparison of what was easier to learn from the GUI and terminal. Follow the submission location and file count provided in Google Classroom.
Everyday Python project: My Computer Report
Create a small Python program named computer_report.py. It should print the operating system, computer name, processor description, Python version, and total, used, and free space in your home drive. Begin with Python’s built-in platform and shutil modules so the program also works in WSL and on a Mac.
Run it from the terminal and compare its answers with System Info and the Linux commands above. Add the program to your Git repository later. Your report must not include passwords, serial numbers, public IP addresses, access tokens, or private information about another student.
Extend your learning
- Read the Linux Mint user guide.
- Explore the htop project documentation.
- Investigate one unfamiliar device listed by
lspciand explain its purpose.
Review and reflect
You identified CPU, RAM, storage, graphics, and networking information in two ways. Which measurement changed while you opened applications, and which hardware facts stayed the same?