USB, Peripherals, and Cable Management
USB connector shape and USB capability are different questions.
Figure 1. Common USB shapes. Open image source and licence.
USB Type-A
The familiar rectangular connector for computers, chargers, flash drives, mice, and keyboards.
USB Type-B
The square connector still used on printers, audio interfaces, and lab devices.
Mini-USB and Micro-USB
Older small connectors on cameras, controllers, phones, and embedded boards.
USB-C
Small and reversible. It may carry data, charging, docks, storage, Ethernet, audio, or video, but not every cable supports every feature.
USB-C cables are different

USB-C to USB-C
Check the printed specification for data speed, charging power, and video support.
Figure 2. Open source and licence.

USB-A to USB-C
A passive A-to-C cable does not carry DisplayPort Alt Mode to a monitor. An active USB graphics dock is different: it contains electronics and usually needs a driver.
Figure 3. Open source and licence.
Check four things
- Connector shape at each end.
- Data speed printed on the cable or package.
- Maximum charging power in watts.
- Explicit DisplayPort, USB4, or Thunderbolt support when video is needed.
Common peripherals
Mouse and keyboard
USB-A, USB-C, Bluetooth, or a small wireless receiver.
Headphones and microphone
3.5 mm audio, USB-A, USB-C, or Bluetooth.
Storage and printers
Flash drive, HDD, SSD, card reader, printer, scanner, or camera.
Controllers
Webcam, game controller, drawing tablet, robotics controller, or microcontroller.
Clean cable management
Leave a small service loop. Label both ends of similar cables. Do not pull tight, crush under furniture, or hang weight from a connector.
Visual check: photograph the back of one correctly connected computer. Label power, monitor signal, Ethernet, keyboard, mouse, audio, and one spare USB port.