Technological Education Resources Technological Education Resources Tech Edu
  • Educator Resources
    • General Slides
    • General Materials
    • General Design & Fabrication
    • Computer Engineering Notes
  • Classes
    • TAS Slides
    • TEJ Slides
    • TTJ / TTS Slides
  • Glossary
  • Lore
  • About
  1. TEJ3/4 Computer Engineering Home
  • TEJ3/4 Computer Engineering Home
  • Curriculum Roadmap
  • Engineering Preparation Track
  • Electronics Lesson Library
  • 4. Project Portfolio
    • 1. Build a Technical Portfolio
  • 5. Circuits and Electronics
    • 1. Component Foundations: Circuits and Schematics
    • 2. Component Foundations: Resistors
    • 3. Capacitors 1: Capacitors from Zero
    • 4. Capacitors 2: RC Charging and Discharging
    • 5. Capacitors 3: RC Time Constants and Design
    • 6. Component Foundations: Diodes and LEDs
    • 7. Component Foundations: Transistors
    • 8. Component Foundations: Operational Amplifiers
    • 9. Package 1: Basic Electricity and Parallel Circuits
    • 10. Package 2: Parallel Review and Series Circuits
    • 11. Series-Parallel Combination Circuits, Part A
    • 12. Kirchhoff’s Laws
    • 13. Linear Algebra for Circuits
    • 14. Build and Measure Circuits in Tinkercad
  • 6. Computer Systems
    • 1. Open a Computer Safely and Identify the Parts
    • 2. USB, Peripherals, and Cable Management
  • 7. Linux and Operating Systems
    • 1. Choosing a Linux Distribution
    • 2. Install Linux Mint
    • 3. Explore Linux
    • 4. Know Your Linux Computer
    • 5. Files, Terminal, and Permissions
    • 6. Git Version Control
    • 7. Build a Quarto Website
    • 8. Publish with GitHub Pages
    • 9. Python Measurement Logging
    • 10. Python Analysis and Curve Fitting
    • 11. Networking, SSH, and tmux
    • 12. Power and Raspberry Pi Bridge
  • 8. Networking
    • 1. How Wi-Fi and Ethernet Connect
    • 2. Ethernet Cable Categories and Speeds
    • 3. Build and Test an Ethernet Cable
  • 9. Computational Engineering
    • 1. Python Engineering Notebooks with JupyterLite
    • 2. Circuit Quest: Power the Grid
    • 3. Assignment: Python First Steps
    • 4. Run Python and Jupyter on Your Own Computer
    • 5. Assignment: Python and NumPy Foundations
    • 6. Find Documentation and Ask for Programming Help
    • 7. Assignment: From Two Loops to a Matrix
    • 8. Jupyter Electronics Lab
    • 9. Life Checkpoint Upgrade: Jupyter + Tinkercad

TEJ3/4 Computer Engineering

A concise, generated table of contents for the complete TEJ learning pathway.

Use this page as the front door to the course. Open a published lesson and its class materials, or scan the planned modules to see where the sequence is going.

ImportantThis week: November 16 to 20
  1. Monday, Lab 225: Open the capacitor slides. Start at slide 1, play the videos when they appear, and continue through slide 19. Then complete Parts 1 to 4 of the capacitor notebook. Submit the notebook by Tuesday at 7:00 PM.
  2. Tuesday, Portable 1: Complete both pages of the capacitor graph handout. Small groups rotate to the component table to meter-check and sort resistors and capacitors. Submit clear photos of both pages by Wednesday at 7:00 PM.
  3. Wednesday, Lab 225: Open the RC data and functions notebook. Calculate the time constant, plot Tuesday’s measurements as dots, define the charging and discharging functions, draw the smooth curves, and use capacitor voltage to predict a fading LED’s current.
  4. Thursday, Portable 1: Continue sorting components and complete the Stage 1 calculation and paper wiring plan. No powered build.
  5. Friday, Lab 220: Begin Stage 1: LED, resistor, and pushbutton in Tinkercad. Submit the link and screenshot by Sunday, November 22 at 7:00 PM. Monday, November 23 is the lab correction day. Physical building begins only after the simulation earns 100%.

Open the complete capacitor week page.

Open the component-sorting and RC station notes.

Search and filter lessons
Filter by module

Showing 46 lessons.

1. Orientation1 lesson
1. Course Orientation (planned)▾

A concise orientation lesson is planned.

It will connect the site, classroom workflow, and project evidence.

2. Safety1 lesson
1. Technology Lab Safety (planned)▾

The consolidated safety lesson is planned.

It will connect hazard recognition to classroom procedures.

3. Design1 lesson
1. S.O. N.I.C.E. Design Process (planned)▾

Use the General Design & Fabrication learning path.

The shared process prevents duplicate design notes.

4. Project Portfolio1 lesson
1. Build a Technical Portfolio▾

Document an engineering problem, evidence, revisions, and conclusions in a private or teacher-approved format.

The portfolio connects calculations, schematics, simulations, measurements, Python analysis, and reflection without requiring public publication.

Quarto Portfolio Starter ZIP

5. Circuits and Electronics14 lessons
1. Component Foundations: Circuits and Schematics▾

Start from zero with circuit roles, schematic symbols, wires, nodes, junctions, ground, and one complete current path.

Students need a shared visual language before calculations, simulation, breadboarding, or troubleshooting.

2. Component Foundations: Resistors▾

Distinguish resistance from a resistor and use value, tolerance, power, Ohm's law, and current limiting.

Resistors appear in nearly every later circuit and protect components such as LEDs and transistor inputs.

3. Capacitors 1: Capacitors from Zero▾

Learn capacitor structure, symbols, units, polarity, voltage rating, stored charge, and energy.

The first package establishes the component before time-dependent circuit analysis.

Slides Five-Question Sheet Jupyter Notebook Teacher Answers, restricted

4. Capacitors 2: RC Charging and Discharging▾

Predict starting conditions, steady state, charging curves, and discharging curves.

Students connect a clean schematic to a graph, Jupyter model, and Tinkercad circuit.

Slides Five-Question Sheet Jupyter Notebook Tinkercad Classroom Teacher Answers, restricted

5. Capacitors 3: RC Time Constants and Design▾

Calculate a time constant, solve for a part value, select a standard part, and verify the actual result.

The design package connects RC circuits to simulation, engineering tolerances, op amps, and an optional calculus bridge.

Slides Five-Question Sheet Jupyter Notebook Tinkercad Classroom Teacher Answers, restricted

6. Component Foundations: Diodes and LEDs▾

Learn diode direction, polarity, forward voltage, reverse blocking, LED current limiting, and diode-mode testing.

Diodes provide protection, indication, rectification, and two orientation-sensitive parts in the XL741 kit.

7. Component Foundations: Transistors▾

Introduce NPN and PNP transistor terminals, switching, ratings, pinout verification, and controlled load current.

Transistor knowledge turns the XL741 from a mysterious board into a visible network of functional stages.

8. Component Foundations: Operational Amplifiers▾

Explain differential inputs, supply rails, negative feedback, voltage followers, real limits, and the optional XL741.

Op-amps connect component behaviour to sensing, control, signals, feedback, and an optional bridge to calculus.

9. Package 1: Basic Electricity and Parallel Circuits▾

Connect basic electrical quantities, components, measurement, computer loads, and parallel-circuit calculations.

Parallel paths explain why loads in computers, vehicles, and buildings operate independently.

Package 1 Slides Parallel-Circuit Handout Photo Submission Student Models: Questions 1 and 2 Grob Chapter 5 Problems Manual Experiment 5-1 Experiment 5-2 Experiment 5-3 Quick Reference Schematic + GUESS Teacher Answers, restricted

10. Package 2: Parallel Review and Series Circuits▾

Review one parallel calculation, then calculate current, voltage drops, resistance, and power in one-path circuits.

Series rules appear in indicator lights, sensor chains, voltage drops, and component strings.

Package 2 Slides Six-Question Problem Set Worked Q2 + Q4 Grob Chapter 4 Grob Chapter 5 Review Problems Manual Experiment 4-1 Experiment 4-2 Quick Reference 5% Resistor Values Schematic + GUESS Teacher Answers, restricted

11. Series-Parallel Combination Circuits, Part A▾

Assignment 1.4: reduce mixed networks in stages and verify currents and voltages.

Real systems often combine shared paths with parallel loads.

Day 22 Slides Complete Teaching Deck Digital GUESS Assignment Printable or Handwritten Assignment Quick Reference 5% Resistor Values Schematic + GUESS Teacher Answers, restricted

12. Kirchhoff's Laws▾

Write current and voltage equations for circuits that cannot be reduced directly.

Kirchhoff analysis supports troubleshooting and more advanced network methods.

Slides Current Problem Set Quick Reference Schematic + GUESS Teacher Answers, restricted

13. Linear Algebra for Circuits▾

Solve simultaneous circuit equations by substitution, elimination, and matrices.

The method prepares students for college and university network analysis.

Slides Current Problem Set Quick Reference Teacher Answers, restricted

14. Build and Measure Circuits in Tinkercad▾

Build a low-voltage circuit, run the simulation, measure it, and compare the evidence with a calculation.

Simulation provides a safe, repeatable bridge between schematic analysis and physical measurement.

Tinkercad Circuits

6. Computer Systems2 lessons
1. Open a Computer Safely and Identify the Parts▾

Use power and static precautions, identify the main internal parts, and compare HDD, SATA SSD, and M.2 storage.

Safe part recognition prepares students to inspect and service a desktop computer.

2. USB, Peripherals, and Cable Management▾

Recognize USB connector shapes, check USB-C capabilities, connect common peripherals, and route cables cleanly.

A serviceable workstation is easier to use, inspect, and troubleshoot.

7. Linux and Operating Systems12 lessons
1. Choosing a Linux Distribution▾

Compare distribution families, desktop environments, hardware needs, software, and support.

A good choice matches the computer and the work instead of following a brand name.

Slides

2. Install Linux Mint▾

Prepare installation media, protect data, install Mint, and verify the result.

The procedure supports computer recovery and prepares a system for later projects.

Slides Linux Mint Installation Reflection

3. Explore Linux▾

Complete Computer Detective, explore Bashcrawl, and customize the Linux Mint desktop using separate submission contracts.

The activities build confidence before students administer or program the system.

Slides 3.1 Computer Detective 3.2 Bashcrawl 3.3 Sleek Out Linux Mint Linux Offline Kit

4. Know Your Linux Computer▾

Record hardware, operating-system, storage, and device information.

A verified inventory supports troubleshooting, upgrades, and performance comparisons.

5. Files, Terminal, and Permissions▾

Navigate paths, inspect files, and use permissions safely.

These skills are essential for administration, automation, and development.

6. Git Version Control▾

Record, inspect, and share changes with a safe Git workflow.

Version control protects project history and supports collaboration.

7. Build a Quarto Website▾

Turn Markdown, code, and media into a small technical website.

A website makes project evidence and explanations easy to review and share.

8. Publish with GitHub Pages▾

Publish a reviewed static site without exposing secrets or private files.

Deployment turns local documentation into a durable public portfolio.

9. Python Measurement Logging▾

Write a small Python program that records measurements with units and timestamps.

Logging supports sensor tests, performance studies, and repeatable experiments.

10. Python Analysis and Curve Fitting▾

Inspect recorded data and fit a simple model.

Analysis connects observations to engineering decisions and predictions.

11. Networking, SSH, and tmux▾

Diagnose a network connection and manage a remote Linux session safely.

Remote administration is common for servers, Raspberry Pi systems, and lab equipment.

12. Power and Raspberry Pi Bridge▾

Connect computer power concepts to a future Raspberry Pi build without inventing a lab.

The calculation bridge prepares students to reason about supplies, loads, and interfaces.

8. Networking3 lessons
1. How Wi-Fi and Ethernet Connect▾

Trace data through an access point or cable, a switch, a router, and Internet service.

Separating the jobs of Wi-Fi, switching, and routing makes network faults easier to locate.

2. Ethernet Cable Categories and Speeds▾

Compare Cat5e, Cat6, Cat6A, and Cat8 and identify the 8P8C plug commonly called RJ45.

Cable labels and limits help students choose an appropriate connection instead of guessing by colour.

3. Build and Test an Ethernet Cable▾

Terminate both ends in T568B order, inspect the crimp, and verify all eight conductors with a tester.

A complete build-and-test procedure turns cable theory into reliable classroom work.

9. Computational Engineering9 lessons
1. Python Engineering Notebooks with JupyterLite▾

Open, run, edit, save, download, and submit engineering notebooks in a browser.

The browser workflow works without a local install or new account when the school permits JupyterLite.

Notebook Bundle

2. Circuit Quest: Power the Grid▾

Rotate circuit tiles, complete three paths, light lamps, and see how a branch carries power.

A short clickable game gives students an immediate success experience in Jupyter before the longer circuit assignment.

Circuit Quest Notebook

3. Assignment: Python First Steps▾

Start from zero with notebook cells, printing, calculator operations, variables, four basic types, lists, and one small NumPy array.

Students learn the minimum Python and Jupyter vocabulary needed before the larger NumPy and circuit notebooks.

Python First Steps Notebook

4. Run Python and Jupyter on Your Own Computer▾

Choose a Jupyter route for Windows with WSL, macOS, Linux, native Windows, or Google Colab.

Local Jupyter gives students more control over files, packages, and hardware; Colab remains a no-install fallback.

Notebook Requirements Google Colab

5. Assignment: Python and NumPy Foundations▾

Continue from Python basics to NumPy arrays, plotting, documentation lookup, and evidence-based debugging before circuit linear algebra.

Students complete a resistor investigation with vectorized calculations, a reusable function, assertions, a graph, Markdown explanations, and one documentation-driven repair.

Python and NumPy Notebook NumPy Documentation

6. Find Documentation and Ask for Programming Help▾

Reproduce a problem, search official documentation and Stack Overflow, and ask a complete technical question.

Students learn to provide minimal code, exact errors, environment details, attempted fixes, sources, and a reasoned hypothesis when requesting help.

Stack Overflow: How to Ask pandas Documentation

7. Assignment: From Two Loops to a Matrix▾

Derive two signed KVL equations, arrange them in matrix form, and solve the same system numerically and symbolically.

The guided bridge teaches the missing step between loop traversal and a reproducible computational solution without creating another five-question package.

Printable Two-Loop Guide Two-Loop Matrix Notebook Notebook Bundle

8. Jupyter Electronics Lab▾

Complete a simulation-first electronics pathway while components, instruments, or soldered kits are unavailable.

Students apply documentation, debugging, calculations, models, graphs, checks, and investigations before adding physical validation.

Notebook Bundle RC and Op-Amp Calculus Notebook

9. Life Checkpoint Upgrade: Jupyter + Tinkercad▾

Digitize and correct the Life Checkpoint, solve it with NumPy, and verify the same circuit in Tinkercad.

The two-day reassessment joins the existing checkpoint, LaTeX, Python, matrices, simulation, and measurement in one opportunity to improve the checkpoint mark to 100%.

Student Notebook Tinkercad Circuits

10. Robotics and Control Systems1 lesson
1. Robotics and Control Sequence (planned)▾

The public package sequence is planned.

It will connect diagrams, code, measurements, and physical tests.

11. Engineering Preparation1 lesson
1. Engineering Preparation Track (planned)▾

Use the concise track overview, including the optional XL741 signal-and-calculus bridge, with its current notes and problem sets.

The page connects existing packages to recognizable engineering systems and introduces calculus through measured circuit behaviour.

No lessons match these filters.

Website code: AGPL 3.0. Educational content: CC BY-SA 4.0.

Educational content may be shared, copied, modified, and redistributed. Keep the CC BY-SA 4.0 licence and credit Andrew Andrade, andrewandrade.ca, and github.com/mrandrewandrade. Add your own name and links when adapting it. Sharing is caring.

The website code uses the AGPL 3.0, a copyleft licence: if you share modified code or run a modified version as a network service, you must make the corresponding source code available under the same licence.

 
  • References

  • Licensing