Paper to Inkscape | Student Workflow
The rule
Build the design from measurements and named parts. Do not redraw every primitive by eye. Keep the editable master; make a separate fabrication copy only when the local machine workflow requires converted text or flattened artwork.
Before the screen
- Complete the fabrication planning worksheet.
- Draw front, top and side views. Mark the datum: the edge or centre from which important dimensions are located.
- Measure the real object and sheet. Record ranges when objects vary.
- Decide whether each circle means a hole or a circle part.
- Identify one critical feature to test before the complete cut.
Set up Inkscape
- Open File → Document Properties.
- Set display units and document units to mm.
- Set the page to the intended physical output size.
- Save immediately as
project-name_v01_master.svg. - Turn on snapping only when it supports the intended datum and alignment; do not let snapping replace entered dimensions.
Bring in building blocks
If the project begins as a plate with a row, grid, radial or perimeter hole pattern, use the Fabrication Plate Builder first. Its output is intentionally plain: CUT_OUTER, CUT_HOLES and an optional GUIDES group. Inkscape remains the place to add labels, slots, custom profiles and manufacturing intent.
- Open the relevant component palette.
- Select the named component group and copy it into the master file.
- Use the toolbar or Object → Transform to enter exact width, height and position.
- Rename the group by purpose:
top-shelf,bottle-hole-01,left-gusset. - Duplicate repeated parts from one checked original. Use Object → Align and Distribute for centres and spacing.
Avoid advanced node editing in the first sequence. If a shape requires many uncontrolled node moves, return to simpler parts or revise the paper plan.
Separate manufacturing intent
Use clearly named groups or layers for CUT, SCORE and ENGRAVE. The library uses red, blue and black as a communication convention, but the machine operator confirms the local mapping. A colour alone is never approval to cut.
For the first name-tag engraving, set the page to the measured pre-cut blank, keep artwork inside the safe margin, hide/delete guides, and export the page as PNG at the instructor-set resolution. Reopen the PNG and confirm pixel dimensions, crop and orientation before it enters the laser workflow.
Preflight
- Page width, page height and intended object size are correct in mm.
- Every critical dimension matches the paper plan.
- One controlled original was used for duplicates.
- No duplicate paths, stray objects, hidden output or critical external fonts remain.
- The machine preview contains the expected count of cuts and engraves.
- A fit coupon was made for slots, holes, hardware or measured objects.
- The filename shows project and version; obsolete versions are not sent accidentally.
Evidence to submit
Submit the paper plan, editable SVG master, fabrication/export file, photograph or measurement from the test, and one sentence naming what changed in the next version.
Use Material Fit + Calibration whenever a dimension must mate with real stock, hardware or an object.