Fabrication Planning Worksheet
A reusable print-friendly planning sheet connecting a real need, measured orthographic views, parts, operations, assembly, testing and revision.
Fabrication planning record
Designer(s): Date: Project/version:
1 · Need and success criteria
Who needs what, where, and why?
A successful solution must… Write three observable criteria and one constraint.
2 · Measure the real context
| Item / interface | Tool used | Nominal (mm) | Measured range (mm) | Clearance or fit decision | Why this controls the design |
|---|---|---|---|---|---|
Material: __________ Measured thickness: ______ mm Machine/material calibration source: ____________________
3 · Draw before opening Inkscape
FRONT · add overall dimensions, centres and labels
TOP · show openings, spacing, margins and access
SIDE · show height, support, load path and assembly
4 · Parts and operations
| Part name | Qty | Finished size (mm) | Source component | CUT / SCORE / ENGRAVE | Material |
|---|---|---|---|---|---|
Assembly order: 1. ____________________ 2. ____________________ 3. ____________________ 4. ____________________
5 · Preflight and approval
Course process reference / review: ____________________ Date/time: ____________________
6 · Test, evidence and revision
| Test | Expected result | Actual evidence / measurement | Pass? | Revision made |
|---|---|---|---|---|
| Fit / clearance | ||||
| Stability / load | ||||
| Access / removal | ||||
| Layout / readability |
Next version: Change ______________________________ because ____________________________________________.