Open a Computer Safely and Identify the Parts

computer systems
hardware
safety
storage
A visual guide to power safety, static control, computer parts, and storage connections.

Power off. Unplug. Control static. Then look inside.

POWER OFF

UNPLUG

HOLD POWER 10 s

CONTROL STATIC

HANDLE EDGES

NEVER OPEN THE PSU

ImportantBefore the case opens

Shut down, unplug wall power and peripherals, then hold the power button for about 10 seconds. Work on a clean, dry, non-carpeted surface. Use the approved antistatic procedure. Never open the metal power-supply enclosure.

Exploded desktop computer showing the case, power supply, motherboard, processor, memory, drives, cooling, and expansion parts.

Figure 1. The whole system first. Open image source and licence.

What is inside?

Motherboard

The main circuit board. It connects the CPU, RAM, storage, power, ports, and expansion cards.

CPU

Runs program instructions. A heat sink and fan usually cover it.

RAM

Fast working memory for programs in use now. It clears when power is removed.

Power supply

Converts wall AC to the low-voltage DC used by the computer. Inspect only the outside, cables, and label.

Cooling

Fans, heat sinks, vents, and thermal material move heat away from chips.

Expansion parts

Graphics, Wi-Fi, network, and sound cards add functions. Not every computer has every part.

SSD or spinning hard disk?

A hard disk drive beside a solid-state drive.

HDD: spinning disk

Magnetic platters spin under a moving read/write head. Usually cheaper per terabyte, but slower, noisier, and easier to damage while spinning.

Figure 2. HDD and SSD. Open source and licence.

M.2 solid-state drive circuit board.

SSD: flash storage

Stores data in electronic flash memory. No moving parts. Usually faster, silent, lower-power, and more resistant to bumps.

Figure 3. M.2 SSD. Open source and licence.

How storage connects

The data and power connectors on a SATA solid-state drive.

SATA drive: two connections

SATA data is the narrow 7-pin path to the motherboard. SATA power is the wider 15-pin path to the power supply.

Figure 4. SATA connectors. Open source and licence.

M.2 storage board ready to mount in a motherboard slot.

M.2 drive: mounts on the board

M.2 describes the shape. The drive may use SATA or NVMe/PCIe. The drive and motherboard slot must support the same type.

Try it

With the computer unplugged, point to each visible part. Say its name and job before touching it. Use the teacher’s motherboard photograph for the model-specific close-up.

NoteOpen Circuits matches for classroom use

Use only directly matching pages: processor SoC, pp. 86 to 87; SATA cable, p. 163; hard-drive heads, pp. 220 to 223; printed circuit boards, pp. 232 to 235; MicroSD flash as a comparison, pp. 238 to 239; logic board, pp. 244 to 247; DC-DC converter, p. 249. Do not publish book scans without permission.

Next: USB, peripherals, and cable management