TECHNOLOGY COMMONS NAME TAG DESIGN PACK

Canvas: 11 x 4 in at 300 ppi
Automatic raster size: 3300 x 1200 px
Safe margin: 0.25 in on every edge
Typeface: Source Sans 3 Bold, all caps
Alignment: logo and name share one horizontal centreline; centre the complete group vertically

VARIATION 1
Technology Commons emblem + A. ANDRADE
Clear and professional. The abbreviated first name preserves room for large letters.

VARIATION 2
Small Technology Commons emblem + ANDRADE
Best distance readability. The name receives almost all available width.

VARIATION 3
Technology Commons emblem + thick AA lettermark + NDRADE
Most personal. The AA mark is thickened by 18 px so it survives engraving and reads as the first A. It is lowered 48 px for optical balance because the broad top makes the mark feel visually high.

Each PSD is 11 x 4 in at 300 ppi and contains separate named artwork layers. The matching PNG is a clean full-size reference/export. Open the PSD in Photopea or Photoshop, select the name layer, replace the text, and recheck the 0.25 in safe margin. If a font substitution warning appears, choose Source Sans 3 Bold from Google Fonts.

PRINTABLE WORKSHEETS
personal-logo-worksheet.pdf: two-page printable handout with sketch space, a worked example, design analysis, and a short student reflection.
personal-logo-photopea-guide.pdf: six-page screenshot walkthrough for rebuilding the selected sketch in Photopea, testing it in black, and exporting PSD, SVG, and PNG files.
name-tag-paper-prototype.pdf: print at Actual size / 100% to make two 11 x 4 in paper prototypes from one letter sheet.

The detailed class walkthrough uses Variation 3. Variations 1 and 2 are examples for comparison, critique, and improvement.
