{
  "designs": {
    "captured-bottle-rack": {
      "assembly_notes": "the lower plate locates each bottle body; the removable upper plate sits below the cap shoulder and is retained by two hand knobs",
      "bom": [
        {
          "part": "lower locating plate",
          "qty": 1,
          "size_mm": [
            190,
            70
          ]
        },
        {
          "part": "base",
          "qty": 1,
          "size_mm": [
            190,
            55
          ]
        },
        {
          "part": "upper keeper plate",
          "qty": 1,
          "size_mm": [
            190,
            55
          ]
        },
        {
          "part": "back",
          "qty": 1,
          "size_mm": [
            190,
            95
          ]
        },
        {
          "part": "standoff",
          "qty": 2,
          "size_mm": [
            70,
            22
          ]
        },
        {
          "part": "M6 hand knob, bolt and washer set",
          "qty": 2,
          "size": "site-specific"
        }
      ],
      "files": {
        "exploded": "pill-bottle/captured-bottle-rack/exploded.svg",
        "parts": "pill-bottle/captured-bottle-rack/parts.svg"
      },
      "parameters": {
        "assembly": "the lower plate locates each bottle body; the removable upper plate sits below the cap shoulder and is retained by two hand knobs",
        "bottle_body_diameter_mm": 34.0,
        "cap_capture_per_side_mm": 2.0,
        "cap_diameter_mm": 42.0,
        "capacity": 4,
        "centre_spacing_mm": 42.0,
        "interface_hole_mm": 6.4,
        "keeper_opening_diameter_mm": 38.0,
        "keeper_type": "hand-knob-retained removable upper plate",
        "material_thickness_example_mm": 6.0,
        "mounting": "bench or approved wall backer",
        "opening_diameter_mm": 36.0,
        "physical_test_record_fields": [
          "bottle body diameter",
          "cap diameter",
          "material thickness",
          "opening fit",
          "keeper height",
          "knob clearance",
          "load test",
          "revision"
        ],
        "physical_test_status": "unverified",
        "radial_clearance_mm": 1.0,
        "safety": "The keeper is a serviceable anti-lift feature, not a child-resistant lock. Physically test access, load path and wall mounting before use.",
        "service_sequence": [
          "support bottles",
          "remove two hand knobs",
          "lift keeper plate",
          "remove or replace bottles",
          "refit plate and hand knobs",
          "record fit and revision"
        ]
      },
      "physical_test_status": "unverified"
    },
    "dowel-supported-rack": {
      "assembly_notes": "dowels align and separate two plates",
      "bom": [
        {
          "part": "top plate",
          "qty": 1,
          "size_mm": [
            190,
            70
          ]
        },
        {
          "part": "bottom plate",
          "qty": 1,
          "size_mm": [
            190,
            70
          ]
        },
        {
          "length_mm": 85,
          "part": "6 mm dowel",
          "qty": 4
        }
      ],
      "files": {
        "exploded": "pill-bottle/dowel-supported-rack/exploded.svg",
        "parts": "pill-bottle/dowel-supported-rack/parts.svg"
      },
      "parameters": {
        "assembly": "dowels align and separate two plates",
        "bottle_body_diameter_mm": 34.0,
        "cap_diameter_mm": 42.0,
        "capacity": 4,
        "centre_spacing_mm": 42.0,
        "dowel_diameter_mm": 6.0,
        "dowel_hole_start_mm": 6.4,
        "material_thickness_example_mm": 6.0,
        "mounting": "bench/free-standing",
        "opening_diameter_mm": 36.0,
        "physical_test_status": "unverified",
        "radial_clearance_mm": 1.0
      },
      "physical_test_status": "unverified"
    },
    "reinforced-wall-rack": {
      "assembly_notes": "two shelf tabs locate in the back; gussets reinforce the shelf-to-back joint",
      "bom": [
        {
          "part": "shelf",
          "qty": 1,
          "size_mm": [
            190,
            70
          ]
        },
        {
          "part": "back",
          "qty": 1,
          "size_mm": [
            190,
            90
          ]
        },
        {
          "part": "gusset",
          "qty": 2,
          "size_mm": [
            60,
            60
          ]
        },
        {
          "part": "approved wall fastener",
          "qty": 3,
          "size": "site-specific"
        }
      ],
      "files": {
        "exploded": "pill-bottle/reinforced-wall-rack/exploded.svg",
        "parts": "pill-bottle/reinforced-wall-rack/parts.svg"
      },
      "parameters": {
        "assembly": "two shelf tabs locate in the back; gussets reinforce the shelf-to-back joint",
        "bottle_body_diameter_mm": 34.0,
        "cap_diameter_mm": 42.0,
        "capacity": 4,
        "centre_spacing_mm": 42.0,
        "material_thickness_example_mm": 6.0,
        "mounting": "wall",
        "opening_diameter_mm": 36.0,
        "physical_test_status": "unverified",
        "radial_clearance_mm": 1.0,
        "safety": "Instructor approves wall, anchors, fasteners and load test.",
        "shelf_tab_width_mm": 30,
        "slot_start_mm": 6.2
      },
      "physical_test_status": "unverified"
    },
    "removable-wall-bench-rack": {
      "assembly_notes": "two removable M6 hand knobs register the same module to either bench supports or an approved wall adapter",
      "bom": [
        {
          "part": "shelf",
          "qty": 1,
          "size_mm": [
            190,
            70
          ]
        },
        {
          "part": "module back",
          "qty": 1,
          "size_mm": [
            190,
            70
          ]
        },
        {
          "part": "bench foot",
          "qty": 2,
          "size_mm": [
            70,
            28
          ]
        },
        {
          "part": "wall adapter",
          "qty": 1,
          "size_mm": [
            170,
            45
          ]
        },
        {
          "part": "M6 hand knob, bolt and washer set",
          "qty": 2,
          "size": "site-specific"
        }
      ],
      "files": {
        "exploded": "pill-bottle/removable-wall-bench-rack/exploded.svg",
        "parts": "pill-bottle/removable-wall-bench-rack/parts.svg"
      },
      "parameters": {
        "assembly": "two removable M6 hand knobs register the same module to either bench supports or an approved wall adapter",
        "bottle_body_diameter_mm": 34.0,
        "cap_diameter_mm": 42.0,
        "capacity": 4,
        "centre_spacing_mm": 42.0,
        "interface_hole_mm": 6.4,
        "interface_spacing_mm": 130,
        "material_thickness_example_mm": 6.0,
        "mounting": "removable wall/bench",
        "opening_diameter_mm": 36.0,
        "physical_test_status": "unverified",
        "radial_clearance_mm": 1.0,
        "safety": "Adapter interface and wall installation require instructor approval and load testing."
      },
      "physical_test_status": "unverified"
    },
    "simple-shelf-rack": {
      "assembly_notes": "side tabs locate in matching shelf and base slots; dry-fit before adhesive or approved fasteners",
      "bom": [
        {
          "part": "top shelf",
          "qty": 1,
          "size_mm": [
            190,
            70
          ]
        },
        {
          "part": "base",
          "qty": 1,
          "size_mm": [
            190,
            55
          ]
        },
        {
          "part": "side",
          "qty": 2,
          "size_mm": [
            55,
            90
          ]
        }
      ],
      "files": {
        "exploded": "pill-bottle/simple-shelf-rack/exploded.svg",
        "parts": "pill-bottle/simple-shelf-rack/parts.svg"
      },
      "parameters": {
        "assembly": "side tabs locate in matching shelf and base slots; dry-fit before adhesive or approved fasteners",
        "bottle_body_diameter_mm": 34.0,
        "cap_diameter_mm": 42.0,
        "capacity": 4,
        "centre_spacing_mm": 42.0,
        "material_thickness_example_mm": 6.0,
        "mounting": "bench/free-standing",
        "opening_diameter_mm": 36.0,
        "physical_test_status": "unverified",
        "radial_clearance_mm": 1.0,
        "slot_start_mm": 6.2,
        "tab_width_mm": 20
      },
      "physical_test_status": "unverified"
    }
  },
  "project": "pill-bottle-organizer",
  "schema_version": 1,
  "units": "mm"
}
